Is the Harness Included with the Hopkins Trailer Connecotr HM47180 Available Separately

Question

Question:

I have the 47180 but need the adapter plug to wire it to the vehicle. Is that available seperate?

asked by: Bob F

0

Expert Reply:

It sounds like you are looking for the wiring harness portion of the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter part # HM47180. If that is the case then this part is not available separately but you can obtain something similar with the Pollak Wiring Harness Extension part # PK11-934 and the Quick Fix 4 Pole Flat Trailer End part # HMC20031. If you need butt connectors to finish up your connections you can use part # DW05745-5.

expert reply by: Conner L

0

Answer 1

I wish that was possible, but you'd have to buy the #HM40975 separately if you wanted that style of connector instead.

view full answer...

Answer 2

I went out to the warehouse and pulled the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter item #HM47180 off the shelf. The brake controller wire is 16 gauge the other three wires in the pig tail are 12 gauge.

view full answer...

Answer 3

I went to the warehouse and took some measurements of the Hopkins Endurance Trailer Adapter, part #HM47180 for you. The White ground wire is 14-inches long. The Red, Blue, and Purple wire measure 8-inches long, and the 4-way harness also measures…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...