What Size Trucks Frames Does Curt Trailer Hitch Receiver # C14048 Fit

Question

Question:

I need to confirm the outside width of 14048 hitch?

asked by: Chris P

0

Expert Reply:

The Curt Trailer Hitch Receiver # C14048 is designed to fit cab and chassis model trucks which all have a frame width of 34 inch to 34 inch measured on the outsides of the truck frame. This is narrower than standard frame trucks so if you have a truck that was originally a cab and chassis (came with no truck bed) this will fit and work well. If you have a different truck let me know. Here's a list of all of the trucks this hitch fits:

2015 - 2019 Ford F-350 Cab and Chassis
2001 - 2014 Ford F-350, 450, and 550 Cab and Chassis
2015 - 2019 Ford F-450 Cab and Chassis
2015 - 2019 Ford F-550 Cab and Chassis
1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-350 models
1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-450 and F-550 models
2000 - 2019 Ford F-650 and F-750 F-650

expert reply by: Jameson C

0

Answer 1

What you will need to do is install a weld-on heavy duty truck trailer hitch like in the link I have provided. All of these hitches are going to be Class IV or V hitches like you are looking for. Welding should be performed by a qualified…

view full answer...

Answer 2

I do have an option for you but most trailer hitches designed for motorhomes max out at 5,000 lbs. That said, there are options for a higher weight capacity but it won't be as simple as bolting it on as they require welding, the Draw-Tite Ultra…

view full answer...

Answer 3

We do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part #41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch…

view full answer...

Answer 4

The sleeve adapters used adapt a 2-1/2 inch hitch to fit a 2 inch hitch accessory do not diminish the towing capacity of the hitch or the accessory installed in the hitch. We have the Curt hitch reducer part #C45405 that would work well for your…

view full answer...

Answer 5

Please refer to the included images I made showing measurements for Curt trailer hitch #C14048. This hitch is designed to fit 1999 to 2016 Ford cab and chassis model trucks. Those are the trucks sold without a bed and are then turned into service…

view full answer...

Answer 6

Thank you for the excellent photos, and for starters, you are correct that it will help ease installation if you lower the gas tank on your 2005 Ford F-350 Cab and Chassis when installing the Curt Trailer Hitch Receiver #C14048. In regards to…

view full answer...

Answer 7

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

view full answer...

Answer 8

The Curt #C13900 is width adjustable, determined by where the bolts are installed in the crossbar of the hitch. If the hitch is assembled in its narrowest orientation as explained on page 3 of the linked instructions, it'll fit on frames that are…

view full answer...

Answer 9

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

view full answer...

Answer 10

I found your Dicor V160FOLNC lug nut cover, and while we do not have a direct replacement we do have something that is pretty close that should work. Check out the Replacement Wheel Master Lug Nut Cover for Wheel Liner #WMRMT9061. This lug nut cover…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Size Trucks Frames Does Curt Trailer Hitch Receiver # C14048 Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching