Height of Timbren Active Off-Road Bumpstops for 2016 Jeep Wrangler Unlimited and Trailer

Question

Question:

These aren’t for the Jeep. These are for my trailer.

asked by: Mike

0

Expert Reply:

The Timbren Active Off-Road Bumpstops - Rear Suspension - 6,000 lbs # TABSTORSEQ are not designed for your 2016 Jeep Wrangler Unlimited. You will instead want the Timbren Active Off-Road Bumpstops - Rear Suspension - 2,400 lbs # TABSJRJK which are a confirmed fit for your vehicle. They measure 3-5/8 inches tall as you can see in the attached photo.

expert reply by: Jason S

0

click to enlarge

Mike

3/1/2019

These aren’t for the Jeep. These are for my trailer.

Reply

Jason S.

3/1/2019

Seeing as they are for your trailer, you may want a different option specifically made for trailers. We have the following options: Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs # TTRA1702 which is 2-3/4" tall x 3-3/8" diameter. Timbren Trailer Suspension Enhancement System Medium-Duty Trailers 7,000 lbs # TTRA1032 which is 3-9/16" tall x 4-1/4" diameter. This looks like a close fit so would be my recommendation based on the information provided. The Timbren Trailer Suspension Enhancement System with Under Steel Frame 10,000 lbs # TTRA15252 which is 4-3/4" tall x 5-9/16" diameter.

Reply

Answer 1

The Timbren suspension kit part #TABSJRJK that you referenced would be the correct enhancement kit for your 2018 Jeep Rubicon Unlimited but since you also have a lift kit you'll need spacers: 1/2" Spacer - #TA25722-90F00 1" Spacer -…

view full answer...

Answer 2

We have spacers that you can add to accommodate a 4" lift on your 2015 Jeep Wrangler Unlimited, but there are no Timbren kits available that come preset for a 4" lift. If your Wrangler Unlimited is a 4WD then I recommend going with the…

view full answer...

Answer 3

Because the #TJRJK is a friction fit into the factory cup where the bump stop fits, a spacer wouldn't work.. If you can provide me a measurement, they might have a fit. They'll need the height difference between the underside of the frame and…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Height of Timbren Active Off-Road Bumpstops for 2016 Jeep Wrangler Unlimited and Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching