Longest Shank Available for the Reese Weight Distribution System
Question:
Hi, there. I purchased this Weight Distribution Kit from you last year. My trailer tongue is short and has a power jack mounted on it. I am not able to open my trucks tailgate all the way when the trailer is hooked up. Would I be able to use a longer shank with this setup to gain a few inches maybe 3 or 4 of clearance? The tongue weight is probably around 600 pounds.
asked by: Stephan
Expert Reply:
Yes, you can use a longer weight distribution shank in order to obtain more clearance for your tailgate. The longest one we offer is the Equal-i-zer Weight Dist Shank part # EQ90-02-4500 which measures 14" from the center of the hitch pin hole to the center of the adjustment hole. This should give you an additional 2-1/4" of clearance. It will also give you more room for vertical adjustment if needed. There will be no issues using this shank with your Reese Weight Distribution System.
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: extended shank
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Q&A: What Weight Distribution System is Right for 1,250 lbs Tongue Weight?
- Q&A: Weight Distribution Recommendation for a Camper with 1250 lbs of Tongue Weight
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Shop: Trailer Hitch
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Search Results: 44649
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Adding Brakes to a Mobile Home Axle
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 25580
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Search Results: dust cap
- Search Results: led turn signal
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Accessories and Parts
