Axle Placement and Suspension System for 20,000 lb Bumper Pull Trailer
Question:
Building a Tandem Axle Trailer with 20000 pounds of capacity My trailer is going to be a bumper pull.Where do I weld the hangers of the springs or how do I know where I can place the hangers?
asked by: Arnoldo C
Expert Reply:
For your trailer, the axle placement will dictate the hanger placement as will whether you use double eye springs or slipper springs. When positioning a trailer axle or adding an additional axle, the key is to make sure that the axles are located in just the right position so that roughly 10 to 15 percent of the total trailer weight is placed on the tongue.
For a heavy duty trailer like you reference I recommend using the slipper spring # DX65QR along with the Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing # HAP-158-258-03. This system is designed for 10K axles.
If you go with a trailer that big as a bumper pull, you want to make sure you have a vehicle and components able to haul it. That much weight is normally a gooseneck or 5th wheel trailer.
Products Referenced in This Question
Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2-1/2 Inch
- Tandem Axle
- Redline
more information >
Product Page this Question was Asked From
Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 10000 lbs
- 3 Inch Wide
- 5 Leaf
- 30-1/2 Inch Long
- Painted
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2-1/2" Slipper Springs - 24-5/8" Equalizers
- Shop: Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Search Results: spring bushing
- Q&A: Tandem Axle Hanger Kit for 2-1/2 inch Wide Slipper Spring with 48-1/2 inch Axle Spacing
- Q&A: Hanger Kit For Tandem Axle Trailer With 2-1/2 Inch Slipper Springs & 10,000 lb Axles
- Q&A: How to Determine if Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2 Slipper Springs Will Work
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Rubber Bushing with Steel Sleeve - 1-1/8" ID, 2-1/8" OD - 3-3/4" Long - Qty 1
- Shop: Equalizer Suspension Bolt with Locknut - 5-1/4" Long
- Search Results: spring equalizer kit
- Q&A: Lug Nut Torque for Aluminum Trailer Wheels
- Search Results: slipper spring
- Search Results: 7 wire
- Search Results: 7 wire cable
- Search Results: 7 wire trailer cable
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Wiring
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Fifth Wheel Hitch
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: Gooseneck Hitch