Determining Proper Axle Spacing
Question:
I'm having to replace entire hanger kit. What are the advantages of closer or farther axle spacing? My old suspension kit is using 24 inch and some equalizers for 48 inch axle spacing. I'm going to replace the old 2 inch springs with 2-1/2 inch springs. Anyway, do you recommend one spacing over the other? Try to achieve an 18k to 20k load capacity.
asked by: John W
Expert Reply:
There is not a recommended space between axles to achieve a higher load capacity. The best position for your axles is going to depend on the factors outlined in the attached diagram. Those weights and measurements are really going to be the deciding factor on what hanger kit you want; the Dexter Tandem-Axle Trailer Hanger Kit # HAP-158-258-02 for 42" spacing or kit # HAP-158-258-03 for 48" spacing.
Products Referenced in This Question
Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 42-1/4" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2-1/2 Inch
- Tandem Axle
- Redline
more information >
Product Page this Question was Asked From
Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2-1/2 Inch
- Tandem Axle
- Redline
more information >
Continue Researching
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 42-1/4" Axle Spacing
- Shop: Rubber Bushing w/Steel Sleeve - 1" Inner Diameter - 2" Outer Diameter - 3" Long
- Q&A: Hanger Kit For Tandem Axle Trailer With 2-1/2 Inch Slipper Springs & 10,000 lb Axles
- Search Results: trailer light bracket
- Shop: Trailer Suspension Bolt, 10K GD Spring Eye Bolt
- Search Results: 14~112
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-342-343 Review
- Shop: Yakima RoadShower Portable Solar Shower for Roof Racks - 7 Gallon
- Shop: Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Driver's Side - 118 Sq Ft
- Shop: Ladder Rack
- Search Results: rr33100
- Search Results: y01151~59
- Search Results: y01152
- Search Results: y01158
- Search Results: y01153
- Shop: Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2
- Q&A: Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Video: Fulton Trailer Fenders - Top Step - F008541 Review
- Video: Redline Trailer Fenders - No Step - PF775X21W Review
- Video: CE Smith Trailer Fenders - No Step - CE19501 Review
- Video: etrailer Round Swivel Marine Jack with Dual Wheel Installation
- Q&A: Hanger Spacing Recommendation for Leaf Spring that is 25-1/4 inches Long
- Q&A: Torque Spec For Leaf Spring Shackle Bolts
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Q&A: Bolt Hole Spacing of the CE Smith Mounting Brackets for Trailer Fender
- Video: Review of Redline Trailer Leaf Spring Suspension - Spring Mounting Hardware - AP216-H238