HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
(15 reviews)
Price: $396.29
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Item # LC184089
Retail:$548.22
Our Price: $396.29
You Save: $151.93
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
- Used (1)
HappiJac Camper Tie-Downs - LC184089
- Front and Rear Tie-Downs
- HappiJac
- Bed-Mounted
- Frame-Mounted
- Custom Fit
- Steel
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Ensures excellent handling without loss of ground clearance
- Distributes weight to keep setup from being too top-heavy
- Holds camper from several angles to prevent it from shifting
- Suited for your off-roading adventures and off-grid camping
- Preserves your truck's good looks with discreet brackets and subtle anchor points
- Custom front support braces install between the bed and the cab
- Couplers remove from anchors installed on the bumper with a quarter-turn
- Made of steel for strength and durability
- Powder coated braces and chrome-plated anchors resist rust and corrosion
- Includes 2 front brackets with support braces, 2 bumper braces, 2 rear anchors, and installation hardware
- Made in the USA
- 1-Year warranty
A Safe and Comfortable Ride
The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel. It's designed to make the camper an integrated part of your truck, instead of a heavy load perched on top of it.
Don't Ruin Your Truck's Looks
When you're not using them, these tie-downs will be pretty subtle. The front anchor plates will poke out an inch or so from between the cab and the bed, but the support braces are completely hidden under the truck. The rear anchors install on the bumper, and when you're not using them, the couplers remove from the anchors with a quick quarter-turn. Small and chrome-plated, these anchor points blend right in.
184089 Happy Jack Truck Camper Tie Down for Slide In Truck Camper
Alternate part number: DF-TT07
Installation Details
This Product Fits The Following Vehicles
- 2012 - 2013 Toyota Tundra 6-1/2 Foot Bed - Double Cab - with board or step underneath truck bed
- 2012 - 2013 Toyota Tundra 6-1/2 Foot Bed - Double Cab - without board or step underneath truck bed and with a factory installed hitch
- 2012 - 2013 Toyota Tundra 6-1/2 Foot Bed - Double Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2007 - 2011 Toyota Tundra 6-1/2 Foot Bed - with board or step underneath truck bed
- 2007 - 2011 Toyota Tundra 6-1/2 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2007 - 2011 Toyota Tundra 6-1/2 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 2WD - Double Cab - without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 2WD - Double Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 2WD or 4WD - Double Cab - with board or step underneath truck bed
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 2WD or 4WD - excluding Double Cab - with board or step underneath truck bed
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 2WD or 4WD - excluding Double Cab - without board or step underneath truck bed
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 4WD - Double Cab - without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 Toyota Tundra 6-1/2 Foot Bed and 4WD - Double Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear - LC184089
Average Customer Rating: 4.3 out of 5 stars (15 Customer Reviews)
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.by: Tim03/04/2024
The mount kit feels nice and sturdy, but the threads on one of the black front brackets was damaged and needed to be chased with a thread tap. The silver turnbuckle style braces needed to be bent way differently on the side that goes to the black front bracket. Irritating that a kit this expensive needs any kind of modification to work. I have a 2010 Tundra 4x4 double cab.
by: Patrick05/20/2022
Great product easy to put on and take off. Just make sure that you tighten the locking nut because I didn't the first time and they vibrated loose! Tightened them and they never came loose after that.
Patrick
5/23/2023
Toe downs are working great! Easy to put on and take off when removing the camper from the truck.
by: Daniel 09/04/2023
Instructions were hard to follow. But once you hold the pieces up, one can figure out the mounts. Some drilling is potentially required.
by: BurleyBob08/25/2023
Fast shopping! Great knowledge of prod uct.
by: Colton 04/22/2023
easy to install with a simple toolset and a year later it still works as it should!
by: Michael08/11/2021
2003 Jeep Wrangler
The tie down system for your rear bumper is horrible. They were corroded within 6 month.
Sierra K.
8/18/2021
It is important to lubricate all aftermarket items if they will be on the vehicle for any extended period of time. Next time, please contact etrailer.com as soon as possible as these had a 1 year warranty.
by: Jake B.11/07/2020
This was fairly easy to install. There was just a bit of bending and tweaking and drilling, but I seem to recall that being caused by some abnormalities on my truck's frame. It's one year later- with the camper on my truck the whole time, and I haven't thought a moment about these things since I installed them.
by: Doug03/10/2020
Delivered on time
Instructions could have been much better ie; video available, as it took too much time trying to figure out the install.
Once installed appears to function very well
by: David 02/08/2024
by: Travis02/14/2022
2014 Toyota Tundra
Kit came early, installing it this weekend thanks to Brian for the prompt response on the emails
by: Dana 09/14/2022
2018 Toyota Tundra
by: Ian 08/30/2021
by: Roy 09/22/2021
by: Niel12/15/2023
by: Sean 09/11/2021
2007 Toyota Tundra
15
15
See what our Experts say about this HappiJac Camper Tie-Downs
- Recommended Camper Tie-Downs For A 2010 Toyota Tundra Short Bed The HappiJac Truck-Mounted Camper Tie-Downs Item # LC184089 is not a confirmed fit for your 2010 Toyota Tundra because the frame is different and bends in the plates are different on the 5-1/2' beds versus the 6-1/2' and 8' beds. The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2307 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3304 are a confirmed fit for a 2010 Toyota Tundra 5-1/2' bed. You'll also need some turnbuckles to lock down your camper. I recommend...
view full answer... - Will HappiJac Camper Tie-Downs Fit 2008 Tundra With 6-1/2 Foot Bed & Running BoardsI am happy to confirm for you that yes, your 2008 Toyota Tundra with a 6-1/2 foot bed and running boards that extend just under the truck bed will be able to install the HappiJac Truck-Mounted Camper Tie-Downs # LC184089. These are the front and rear tie-downs, so along with these the only other thing you will need are compatible turnbuckles, the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898. I have added links below to video reviews of both the tie-downs and turnbuckles...
view full answer... - Best Camper Tie Downs that Fit 2016 Toyota Tundra 6-1/2 ft BedThe best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part # LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and more secure attachment.
view full answer... - Camper Tie Downs for a 2016 Toyota Tundra SR5We do have something for you. But if when you say standard, you mean the 6-1/2' bed then the answer is no the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2307 and # TLR3500 are not what you would want because they only fit the 5-1/2' bed. Instead you would want the HappiJac Truck-Mounted Camper Tie-Downs # LC184089 which fit the 6-1/2' bed. You would also need the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898 or the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs...
view full answer... - Availability Of Camper Tie-Downs For 2020 Toyota Tundra Double Cab with 8' Bed.I have another option for you, but the HappiJac Truck-Mounted Camper Tie Downs # LC184089 you were looking at are not a confirmed fit for your 2020 Toyota Tundra Double Cab with the 8' bed, At this time there is not a custom fit tie-down set confirmed to fit your vehicle, but the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel # HSAB should fit due to their universal design. To confirm this you will need to make sure your bedside is not wider than 5-1/2", and...
view full answer... - Instructions For HappiJac Truck-Mounted Camper Tie-Downs # LC184089I have linked the instructions for the HappiJac Truck-Mounted Camper Tie-Downs # LC184089 that fit your 2013 Toyota Tundra below. Be sure to get a set of HappiJac Original Turnbuckles # LC182898 as they are stainless steel and will last through the harsh elements.
view full answer... - Best Value Camper Tie Downs for 2018 Toyota TundraThe Happijac camper tie downs and turnbuckles are the best value tie downs out there for vehicles like your 2018 Toyota Tundra. They are a higher quality setup that is also priced great for what you get. So for your 2018 Toyota Tundra the correct setup is the part # LC184089 that you mentioned which will also work great with the turnbuckles # LC182898 that you mentioned as well. The LC182898 actually fit versions of the Tundra from 2007 up to 2018 but it depends on how the vehicle is...
view full answer... - Installation of the Rear Bumper Tie Downs of the HappiJac Truck-Mounted Camper Tie-DownsUnfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs # LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed. The general guidelines are as follows: 1. Mounting location should be as flat & vertical as possible. 2. Be sure no moldings or bumper caps interfere with the removable coupler. 3. Check back side of selected mounting location to ensure adequate...
view full answer...
- Determining The Correct Turnbuckles To Connect To HappiJac Camper Tie-Downs Since the bracket is going to sit lower you'll want to measure from the bracket of the # LC184089 up to the mounting point on the camper to determine the exact size needed. For example, the front turnbuckles of the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898 have a 16-1/2" minimum reach and 23-1/2" maximum reach. There are other options with a longer reach if you're needing more than 23-1/2" so let me know what you have and I'd be happy to find the right fit.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit and is missing one of the rear tie downs.
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Amanda K
Written by:
Kristina F
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I am sorry that it arrived damaged. I am surprised that the silver turnbuckle style braces needed to be modified to be installed. I wanted to ask a few questions so that I can trouble shoot it. Can you confirm if you had a 8- or 6-foot bed? Do you have a step board or step under the bed of the truck? Do you have a factory, aftermarket, or a Torklift hitch? Would you be able to send a picture?