Best Trailer Hitch for 2018 Subaru Impreza

Question

Question:

we need a hitch for our 2018 Impreza wagon but would like the one that weighs the least.

asked by: Jeremiah

0

Expert Reply:

Since all hitches are made of steel and are designed to bolt on to the exact same points on any given vehicle there is not usually much weight difference between brands of hitches of the same receiver size and Class rating. But in the case of your 2018 Subaru Impreza Wagon there are actually three different Classes of hitch available, Classes I, II and III, which do have differing weights since some simply have more steel material.

Here are the hitches and their weights by receiver size and Class:

1-1/4-inch Class I:
Draw-Tite # DT24959, 24-lbs shipping weight; Curt # C11465, 29-lbs shipping weight

1-1/4-inch Class II:
Draw-Tite # 36644, 31-lbs shipping weight

2-inch Class III:
Draw-Tite # 76209, 37-lbs shipping weight; Eco-Hitch # 306-X7350, 35-lbs shipping weight

It is not surprising that the heaviest hitch, the 2-inch Class III Draw-Tite # 76209, is also the hitch with the highest weight capacity for both tongue weight and for trailer weight. I recommend this hitch for that reason whether you intend to use a bike rack or tow a small utility trailer.

For some perspective on these hitch weights keep in mind that just a single gallon of gas weighs more than 6-lbs. So the weight differences between hitches is actually pretty minor in the scheme of things. If you drive your car 20 miles you've burned about a half-gallon, or 3-lbs worth of gas.

In terms of your vehicle's capacities you will want to check your owner documentation for the car's own weight ratings since these are quite possibly lower than the ratings for the Draw-Tite hitch. Always stay within the capacity of the lowest-rated part of your towing system.

Several helpful articles on hitches and their installation are included for you. All of the hitches referenced above include mounting hardware.

expert reply by: Adam R

0

Answer 1

Since your 2016 Subaru Impreza is a smaller vehicle there isn't a 2 inch hitch available for it. There are only Class I 1-1/4 inch hitches like the Curt #C11286. When we installed this hitch on a very similar 2014 Impreza we found that it…

view full answer...

Answer 2

The T-One #118744 installs on your 2018 Subaru Impreza by teeing into your vehicle wiring behind the turn signals. It receives power via the black wire that is routed to the battery on your Impreza. If you fail to connect the power wire then your…

view full answer...

Answer 3

It sounds like you have a Class I Trailer Hitch like the Draw-Tite #24960 installed on your 2017 Subaru Impreza. Certain Class I trailer hitches like this one feature a tab inside the receiver that prevents higher class accessories from fitting…

view full answer...

Answer 4

I was able to look up your order and saw that you had purchased the Curt trailer hitch part #C11286. Unfortunately this hitch will fit Subaru Impreza 5 door wagons from 2012-2016. There was a design change for the 2017 models. The correct Curt…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Best Trailer Hitch for 2018 Subaru Impreza

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching