2015 Jayco Jay Flight 27RLS Coupler Lock Recommendation

Question

Question:

I need a coupler lock for the 2015 Jayco Jay Flight 27rls Coupler Lock. What is this coupler\hitch specification and what is the best lock system for this trailer?

asked by: Scott C

1

Helpful Expert Reply:

I pulled up a picture of your 2015 Jayco Jay Flight 27rls and the coupler looks to be an underslung coupler like the part # CA-5335-B. Which then for a lock that is specifically designed to fit this type of coupler we have the part # AT89006 from Atwood that will work great. I attached a picture of this lock installed on a coupler for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

If the coupler on your 2015 Jayco White Hawk 27DSRL has a lip that does not exceed 3-13/16 inches and is not thicker than 5/16 inches the Gorilla Guard Coupler Lock part #63228 that you referenced would work well for you. Check out the review video I…

view full answer...

Answer 2

The purpose of any lock is to keep honest people honest. If the potential thief is determined, any lock can be eventually defeated. The key is to make defeating the lock as difficult, time consuming and noisy as possible. The design of Gorilla Guard…

view full answer...

Answer 3

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 4

Looks like you have a standard underslung thumb latch coupler like the part #CA-5335-B. The Master Lock coupler lock part #2847DAT would fit this and work well.

view full answer...

Answer 5

With this being such an inexpensive part there is not a repair kit offered by the manufacturer for the thumb latch components of the A-Frame Trailer Coupler item #CA-5335-B. I wish I had an option for you but if your pin is no longer functional you…

view full answer...

Answer 6

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 7

There is not a repair kit for the thumb latch of the A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball #CA-5335-B. While I wish we had an option for you, if yours has busted you will need to replace the entire coupler.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

2015 Jayco Jay Flight 27RLS Coupler Lock Recommendation

Products Referenced in This Question

Continue Researching