Curt Q20 5th Wheel Trailer Hitch Review C16130 Video

From the information you provided it looks like you have the Lippert Components 1621 pin box. Yes you are correct the Lippert 1621HD 5th Wheel Pin Box - 18,000 lbs Item #LC1191151 is going to be the direct replacement.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

The Curt Q20 Fifth Wheel Trailer Hitch, #C16130, has a 360-degree pivoting head, not just front-to-back and side-to-side. The single pivot heads only allow the head to move front-to-back and the double pivot heads will allow front-to-back and…

From the research I did it looks as if the MOR/Ryde Pin Box System utilizes an industry standard king pin so it would have no problem being used with a Curt Q20 5th Wheel Hitch #C16130.

The B and W Patriot Hitches like part #BWRVK3200 are designed to fit industry standard fifth wheel rails. If the Pullrite hitch you had was designed to fit the industry standard rails then this hitch would fit the rails as well. I attached a…

I have the current manual of the B and W Patriot hitch part #BWRVK3200 pulled up and it states that pivoting pin boxes like the Sidewinders, Reese Revolutions, and Lippert Turning Points can be used on page 4. I am not sure why you found that but…

The best fixed fifth wheel hitch we offer for your 2019 Ford F-250 with the factory fifth wheel prep package is the USA B and W Companion Hitch part #BWRVK3200. The Companion hitches are widely regarded as the best fifth wheel hitches on the market…

Does your trailer have solar panels? We've heard of this issue and and it appears there is a tech bulletin out about how the solar panel kits on trailers make the truck have this issue and disconnecting helps. The tech bulletin is 23-NA-113…

As long as your fifth wheel hitch was designed to fit the industry standard fifth wheel rails that are 22 inches apart then yes, the Curt X5 part #16310 that you referenced would fit your B and W hitch and work well. I attached an install video for…

To best combat chucking, between a MORryde and Rota-Flex pin box, the best option to replace your Lippert 1621 is the Rota-Flex, with the correct part number being the following: - Trailair Rota-Flex 5th Wheel Pin Box #LC328330 While no pin box is…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Your Pilgrim International Open Road 357RLDS definitely has tires needing replaced. It is not uncommon to use LT tires on trailers, but it sounds like they have some dry rot going on. The stamp on the wheel rim unfortunately is not anything I'm…