etrailer A-Frame Trailer Coupler - Standard Coupler - CA-5335-B Review Video

The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the…

The standard a-frame coupler degree is 50 degrees but we do have a 32 degree coupler with the part #DM15633-81 but the rear width of it is 9-7/16 inches.

I pulled up a picture of your 2015 Jayco Jay Flight 27rls and the coupler looks to be an underslung coupler like the part #CA-5335-B. Which then for a lock that is specifically designed to fit this type of coupler we have the part #AT89006 from…

There is not a repair kit for the thumb latch of the A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball #CA-5335-B. While I wish we had an option for you, if yours has busted you will need to replace the entire…

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

We do have the correct repair kit for your coupler as the Demco Coupler Repair Kit #DM5696 will only work on the leverlock 2" coupler or model DA66 brake actuator. The Trigger Latch Repair Kit for A-Frame Couplers #CA-5100-RK is the correct…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

?The distance from the mounting plate to the foot on the Trailer Valet JX-2K #TV54FR is 13" when fully retracted. The distance from the mounting plate to the top of the jack is 23". This jack can provide you with up to 14" of lift on…

Thanks for the pictures! It looks like you have a 55 amp Paralax Converter. The replacement you are looking for is the Progressive Dynamic Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp item #PD4655V.

The Coupler part #CA-5335-B that you referenced is designed to fit the standard 50 degree a-frame trailers like what 99% of the a -frame trailers on the road have.