Recommended Trailer Wiring Harness for 2018 Ford Escape

Question

Question:

I need wring for my Escape. I'm getting teh etrailer hitch

asked by: Emile

0

Expert Reply:

I recommend part # C56320 for trailer wiring on your 2018 Ford Escape. It has a higher amp draw than the other option. It plugs in behind each tail light and then there's a wire that needs to be connected to the Escape's battery. Everything you need for the instal is included. I've actually linked a video from when we installed it.

I've also linked the video of us installing the etrailer.com htich, part # E98866, in a 2017 Escape. The process is the same with your 2018.

expert reply by: Charles S

0

Answer 1

According to the owner's manual for your 2012 Subaru Impreza, "Your vehicle is neither designed nor intended to be used for trailer towing. Therefore, never tow a trailer with your vehicle." With that being said, should you choose to…

view full answer...

Answer 2

There are trailer hitches that will allow you to use a Thule T2 Pro on your 2012 Subaru Impreza but the EcoHitch Invisi Trailer Hitch #306-X7211 is not a good option. The reason for that is this hitch installs inside the bumper and requires you to…

view full answer...

Answer 3

We have 2 inch hitches that fit your 2012 Subaru Impreza with the part #306-X7241 for if you have a sedan or the #306-X7211 for if you have a wagon but the Curt you mentioned does not fit your vehicle so I cannot recommend it for you.

view full answer...

Answer 4

The trailer hitch you want for your 2013 Subaru Impreza four door is the EcoHitch part #306-X7241. This hitch has a 2 inch opening which means that it would allow you to carry a bike rack with more than 2 bikes loaded since you mentioned wanting to…

view full answer...

Answer 5

The best trailer hitch for your 2018 Ford Escape is the etrailer.com Class III part #E98866. This is because it features a sleek hidden crosstube design where only the 2 inch receiver is visible behind the vehicle (see attached image). Its unique…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...