etrailer.com Trailer Hitch Installation - 2018 Ford Escape Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw Tite part #e98866 is a fit for your 2019 Ford Escape Titanium with the foot activated lift gate. We've found that the lift gate function still works but you'll need to kick your foot to either side of the hitch opening instead. I…

I recommend part #C56320 for trailer wiring on your 2018 Ford Escape. It has a higher amp draw than the other option. It plugs in behind each tail light and then there's a wire that needs to be connected to the Escape's battery. Everything…

There are trailer hitches that will allow you to use a Thule T2 Pro on your 2012 Subaru Impreza but the EcoHitch Invisi Trailer Hitch #306-X7211 is not a good option. The reason for that is this hitch installs inside the bumper and requires you to…

The trailer hitch you want for your 2013 Subaru Impreza four door is the EcoHitch part #306-X7241. This hitch has a 2 inch opening which means that it would allow you to carry a bike rack with more than 2 bikes loaded since you mentioned wanting to…

We have 2 inch hitches that fit your 2012 Subaru Impreza with the part #306-X7241 for if you have a sedan or the #306-X7211 for if you have a wagon but the Curt you mentioned does not fit your vehicle so I cannot recommend it for you.

For your 2018 Ford Escape SE I recommend the etrailer.com Class III Trailer Hitch #E98866 because of its hidden crosstube design that allows for a clean factory appearance because only the receiver itself is visible (see attached image) and unique…

The best trailer wiring harness for your 2018 Ford Escape is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56320 because of its simple installation and the fact that it is rated for the most amps among the harnesses…

The best trailer hitch for your 2018 Ford Escape is the etrailer.com Class III part #E98866. This is because it features a sleek hidden crosstube design where only the 2 inch receiver is visible behind the vehicle (see attached image). Its unique…

Thank you for your purchase of the etrailer Trailer Hitch Receiver #e98866 for your 2014 Ford Escape. The issue you are seeing with the hitch not appearing wide enough is called "flexing" and can be an unfortunate byproduct of the what…

The trailer hitch I highly recommend for your 2019 Ford Escape is the etrailer.com Trailer Hitch Receiver #E98866 because it has a concealed crosstube and is a complete bolt-on installation that will not require drilling into your '19…

To convert your existing 4-pole to a 7-way trailer connector, I would recommend using an adapter, like part #37185. The adapter would plug into your existing 4-pole, and once the white wire is grounded, and the trailer is plugged in, your trailer…