Adding 5-Way Harness to 2018 Toyota Highlander With 4-Flat
Question:
Yes, I have two boat trailers. One has a 4 pin flat (no brakes) while the other has a 5 pin flat (with brakes). The 5 pin flat includes 12V when in reverse to disengage the trailer brake when pressure is put to the hitch ball. Backing up is the same as stopping with regard to force, thus the 12V override. The Highlander comes factory with a 4 pin flat which is fine for the one trailer without brakes. Right now I tow with a Sequoia which has a 7 pin round and I use the adapters 7 to 4 pin flat and 7 to 5 pin flat. The 7 is pre-wired to provide the 12V when in reverse on the correct pin of the 5 pin flat. I am thinking that one solution would be to remove the Toyota wiring and install your 22119. Otherwise i would need to splice into the reverse light to get the 12V but that is less than ideal circuit wise. AS well as still needing a 4 pin flat for the other trailer.
asked by: Steve A
Expert Reply:
I'm a bit confused by your question; the Highlander you are getting has just a 4-pin flat, is that correct? And you are looking to tow a trailer with a 5-flat?
Products Referenced in This Question
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 5 Flat
- Tow Ready
more information >
Product Page this Question was Asked From
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
- Video: Hopkins Trailer Wiring Adapter Installation - 2020 Toyota Corolla
- Search Results: 20036
- Search Results: 47515
- Video: Review of CURT Custom Fit Vehicle Wiring - Toyota Highlander Vehicle Wiring Harness - C79VV
- Video: Hopkins Trailer Wiring Adapter Installation - 2007 Nissan Murano
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
- Shop: Floor Mats
- Search Results: 5 pin harness
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Brake Controller
- Search Results: brake controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Search Results: 90160
Steve A.
10/1/2018
Yes, I have two boat trailers. One has a 4 pin flat (no brakes) while the other has a 5 pin flat (with brakes). The 5 pin flat includes 12V when in reverse to disengage the trailer brake when pressure is put to the hitch ball. Backing up is the same as stopping with regard to force, thus the 12V override. The Highlander comes factory with a 4 pin flat which is fine for the one trailer without brakes. Right now I tow with a Sequoia which has a 7 pin round and I use the adapters 7 to 4 pin flat and 7 to 5 pin flat. The 7 is pre-wired to provide the 12V when in reverse on the correct pin of the 5 pin flat. I am thinking that one solution would be to remove the Toyota wiring and install your 22119. Otherwise i would need to splice into the reverse light to get the 12V but that is less than ideal circuit wise. AS well as still needing a 4 pin flat for the other trailer.