Wiring Harness and Ball Mount Recommendation for a 2018 Ford F-150

Question

Question:

I already bought and installed the Curt C86HR on my 2018 F150 but now I also need the wiring and a ball mount for a small utility trailer.

asked by: Jamie

0

Expert Reply:

The Curt Trailer Hitch # C86HR is an excellent choice for your 2018 Ford F-150. Then for wiring you can either install the Curt # C56110 if you have the rectangular OEM plug or the Curt # C55774 if you have the round OEM plug. Both of these options give you a 4-Way flat connector that will match up with your small utility trailer.

Since pickups can be used for a variety of towing applications I highly recommend installing the B&W Tow & Stow 3-Ball Mount # BWTS10049B. This comes with the 3 standard hitch ball sizes, 1-7/8", 2" and 2-5/16", and will allow you to use it in the drop or rise position. This also has the ability to fold under the hitch receiver when not in use for a clean look and to lower the chances of injuring your shins when walking around your vehicle (it happens more than you would think). A locking hitch pin like part # BX8858 helps to deter theft of this ball mount.

I have also attached some helpful articles and review videos for you to reference.

expert reply by: Jon G

0

Answer 1

Hey Bill, thanks for reaching out! It sounds like you're needing something like the Scissor Stabilizer Jacks w/ Handle #TJSCHD-24. This has a few different holes for the mounting hardware so it should be able to match up with the bolt pattern…

view full answer...

Answer 2

Yes, the B&W Tow & Stow 3-Ball Mount #BWTS10049B that you referenced will fit your 2002 Ford F-350 without any problems. It's designed to fit 2 inch hitches like what your truck has as well. I attached a picture of it…

view full answer...

Answer 3

No matter what kind of towing we got you covered. Out of all of our towing products my recommendations all include part from B&W because they make some of the best towing equipment on the market (made in the USA!) which is backed by a…

view full answer...

Answer 4

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…

view full answer...

Answer 5

The 2" hitch ball on the B&W Tow and Stow #BWTS10049B is on the left hand side and not on the top, so as you've noted it might potentially drag the 2-5/16" ball when towing in that orientation. With that said, typically you'll…

view full answer...

Answer 6

Due how tall the rear of your 2018 Ram 2500 would be I would go with the 7 inch drop version of the B and W Tow and Stow part #BWTS10049B as you'll need the extra range.

view full answer...

Answer 7

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

view full answer...

Answer 8

The B&W Tow & Stow 3-Ball Mount #BWTS10049B measures approximately 5-1/4" from the top of the receiver to the top of the 2" ball when in the lowest position. Keep in mind that drop is measured from the top of the shank to the top of…

view full answer...

Answer 9

The correct size drop to look for in a ball mount is specific to the truck and trailer. You'll want to get the one that allows you to tow multiple trailers yes but if you go with too much drop it can create ground clearance issues. Therefore,…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Wiring Harness and Ball Mount Recommendation for a 2018 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching