B and W Tow and Stow 2-Ball Mount Review BWTS20040B Video

B&W offers both black powder-coat and chrome-finish adjustable Class IV ball mounts that are made in the USA. Both are intended for a 2-1/2-inch hitch receiver and include two hitch balls, a 2-inch rated for 7500-lbs and a 2-5/16-inch rated…

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the…

The Optronics Flexible LED Light Strip #UCL90CB is definitely 3/8" wide so it will be too wide for your awning, but you could still clean the side of your camper and mount this directly to the wall if you wish, that way you can use it without…

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

In order for a Rack Tamer mud flap to fit on a ball mount there has to be at least 1 inch of clearance on the shank. The B and W Stow and Tow Ball Mounts like part #BWTS20040B would have no problem allowing the Rock Tamer to fit. I attached a picture…

With a multi-ball adjustable ball mount like the B&W #BWTS20040B and the similar chrome-finish model #BWTS20040C, both intended for 2-1/2-inch hitches, the weight rating depends on which of the hitch balls is in use. As you might expect, the…

B&W makes their Biker Bar motorcycle transport systems, such as #BWMC2301, just for hogs but we do have other setups for cruiser and touring motorcycle transport that are general-purpose products. You can see all of these wheel shock products on…

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

Measuring on the ground to the inside point of contact of each tire is the correct way to determine which chock setup you need. Yours being 16 inches at the closest point would most likely fall within the 16 to 24 inch range of the #FA84-00-4840.

The rise and drop are measured from the top of the shank down to the top of the ball platform as shown in the photo I've provided for you. If the ball mount in the photo had the ball platform in the lowest available position, the drop would be 9…

For your 2022 Chevrolet Silverado 2500HD with the Multi-Flex tailgate B&W has a line of hitches that were specifically designed for your tail gate in mind. B&W Tow & Stow 2-Ball Mount #BWTS20066BMP B&W Tow & Stow 2-Ball Mount…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…