Mounting Lippert Components Bolt-On Shock Kit
Question:
the instructions say to mount the shock with the upper bracket positioned so that the shock is leaning, pointing away from the equalizer, one of the answers I just read on here state to mount the other shock pointing the same way? The way I read the instructions one shock should be slanted to the rear away from equalizer, the other slanted towards the front away from equalizer. What is the reason for adding 2 inches to the measurement in the instructions. It seems that would eliminate most of the available extension? My shocks 281281 only have 4 7/8th inch travel, midpoint would be at 2 7/16. adding 2 inches only leaves 7/16 inch before full extension.
asked by: Ed H
Helpful Expert Reply:
The Lippert Components Bolt-On Shock Kit # LC281281 should have both shocks mounted pointing outwards, the same way, away from the equalizer. Adding two inches to the measurement is simply what Lippert deemed will give these shocks the best performance and ensure a proper angle. So long as you can fit these shocks and not exceed a 45 degree angle they should perform like you are wanting.
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Search Results: self tapping screws
- Shop: Replacement Upper Mounting Bracket for Lippert Gas Shock Kit - Qty 1
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Shop: Replacement Shock Mounting Plate for Lippert Components Gas Shock Kit - 2-3/8" Axle - Qty 1
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Shop: Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 3,500-lb Axles
- Search Results: lc281281
- Video: Review of Lippert Replacement Shock Mounting Plate For Gas Shock Kit 281255 - LC22FR
- Video: Review of Lippert Trailer Leaf Spring Suspension - Bolt-On Shock Mount Kit - LC281255
- Q&A: Replacement Upper Mounting Brackets For Lippert Bolt-On Shock Kits
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit LC281255
- Q&A: Replacement Leaf Springs and Shock Kit for Trailer with Two 3500 Pound Axles
- Q&A: Which is Better The Roadmaster Trailer Shock Kit or the Lippert Kit and Why
- Q&A: Replacement Leaf Springs and Shocks for 2004 Jayco Qwest Baja
- Q&A: Correct Orientation and Ability to Mount Lippert Shock Kit on Inside of Frame Rail
- Q&A: How to Determine if Lippert Bolt-On Shock Kit # LC281255 Will Fit Over-Under Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: equalizer
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
- Search Results: leaf spring
- Article: Trailer Tire Sizing
on Trailer Suspension Parts
