Best Fit Bolt-On Shock Kit for a 2019 Palomino Puma 5th Wheel Trailer
Question:
i was told that i need 4 inch clearance between tire and frame edge, i have only 3 inches. that is mounting the shocks outward. an expert at monroe said i should be able to mount the 281281 kit inward and have no clearance problem. what do you think. i was also told that if mounting outward i could you wheel spacers. i have an i beam frame, what do you think about notching the frame by the shock for clearance. i would really like to use this 281281 kit. i have a 2019 puma fifth wheel trailer with 3 inch axle. any ideas?
asked by: Al S
Helpful Expert Reply:
For your 2019 Palomino Puma 5th Wheel Trailer, I recommend you use the Roadmaster Comfort Ride Shock Kit part # RM-2460-50 instead of the Lippert Components Bolt-On Shock Kit part # LC281281. The reason for this is because the Roadmaster Kit is designed to be mounted on the inside and to the bottom of the frame rail. Therefore, you won't have to worry about the minimal frame to tire clearance that you have now.
Unfortunately, I cannot advise on notching the frame, using wheel spacers, or installing the Lippert Components Bolt-On Shock Kit against what Lippert recommend. These are unnecessary risks to take when there is a kit available that will work for you without any major modifications.
Products Referenced in This Question
Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Triple Axle
- Roadmaster
more information >
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Q&A: Replacement Equalizer, Shackles and Shock Kit For a 2022 Nash 23D Travel Trailer
- Q&A: SumoSpring For A 2022 Grand Design 22RBE With Dual 3.5K Overslung Axles
- Q&A: Can Trailers Have Shock Absorbers Installed
- Q&A: Which MORryde X Factor Braces Do I Need for a Tandem Axle Trailer w/ CRE3000 Equalizers?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Shock for Dexter Axle 052-003-00
- Q&A: How to Measure to Determine Fit of Lippert Bolt-On Shock Kit LC281281
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings