Recommended Trailer Axle and Galvanized Hub Assemblies for 2,000 lb Capacity Trailer
Question:
Im looking at the 204401-ST-60. I live in Atlantic Beach NC. Salt water! Does this come galvanized?
asked by: Stereoconcepts
Expert Reply:
The Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-ST-60 is powder coated, but not galvanized.
The best we can do to make sure it wears well with all the salt water is to instead use the same Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs # T20BTR-6048 but change out the assemblies. You will want the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-2K for that additional corrosion resistance. This kit does not come with grease, so you will also want # L11390.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Can Damaged Axle on 1999 Shorelander Boat Trailer Be Sanded Smooth
- Video: Review of ABS Fasteners Trailer Leaf Spring Suspension - Double Eye Shackle Bolt and Nut - ABS74FR
- Search Results: marine grease
- Search Results: boat trailer wheels
- Search Results: axle bearing kit
- Search Results: tires 4.80 12
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Search Results: leaf spring shackles
- Shop: Washer For 1" Spindle
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: equalizer
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Trailer Wiring
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: How to Accurately Measure Trailer Leaf Springs