Firestone Suspension Enhancement Recommendation for 2018 Chevy Silverado 2500

Question

Question:

I have a 2018 Chev Duramax, 2500HD, short box. Factory hitch on the back. I need some Firestone rear airbags. You guys recommend the F2702. I want to make sure these are the correct airbags. Other sites say this model won’t install on my truck. Just checking.

asked by: Doug J

0

Expert Reply:

The Firestone Ride Rite kit part # F2709 is a confirmed fit for your 2018 Chevy Silverado 2500 with the factory rail kit. We checked with Firestone to confirm that this is the correct fit for your vehicle.

I attached an install video for this kit for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Yes the Firestone Ride Rite kit part #F2709 is a confirmed fit for your 2013 GMC Sierra 2500HD and would align properly and install easily. I attached an install video for this for you to check out as well.

view full answer...

Answer 2

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 6

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 7

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 8

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 9

You are a little on the warm side for your transmission fluid. If you can keep it under 200 degrees you will have the max life out of it. That being said transmissions really start to go downhill at 260 degrees. The Derale cooler part #D13503 with…

view full answer...

Answer 10

The best hitch I'd recommend for your 2011 Chevy Silverado is the Curt hitch part #14301 because it has great towing capacities at 10,000 lb trailer weight and because it has only the hitch tube that hangs below the rear bumper for a more…

view full answer...

Answer 11

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…

view full answer...

Firestone Suspension Enhancement Recommendation for 2018 Chevy Silverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching