Brophy E-Track Stop Plate Review Video

Instead of splitting the wheel chocks and straps of one Erickson ATV E-Track Tie-Down Kit #EM09160 across the ATV's two axles I suggest using two kits. The modest price of this Erickson tie-down kit means using two will not cost too much, but…

Installing the E-Track Trailer Cargo Control, part #EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described.…

E-Track such as the Erickson Horizontal E-Track #E19148 can be used in any way that allows you to mount your pair of motorcycles. As you can see in some of the photos I've added, there is not a set way to add the track. You will need to take…

So there are a number of different reasons why the signal is not working with your Furrion Vision S Camera System #FOS05TASF. It's pretty unlikely the unit is defective (though not outside of the realm of possibility) but first there's some…

If you have the #FOS05TASF Furrion Vision S system, Furrion offers 3 different monitor sizes. For 4.3 inch, use #FR77FR, use #FR97FR for a 5 inch or #FR47FR for a 7 inch. Any of the 3 would be compatible with the #FOS05TASF system. If you needed the…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

The side camera (or any of your cameras) can be paired with more than one monitor but not at the same time. You cannot pair your camera(s) to both your 7 inch and your 5 inch monitors. It's basically the same concept as trying to pair two…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

E-Track like #E19148 is zinc-coated steel and since the trailer is aluminum you would want to paint the bottom of the E-Track. Otherwise the dissimilar metals can cause corrosion to start. Be sure to also consider the fasteners used. Zinc-coated…

If attaching the E-track or E-Track end caps #ET8730 to a surface you would just use the appropriate hardware (screws are fine) for that surface material. Bolting them on is not required but if you wanted to use nuts and bolts you could.

I'm not sure which coupler that is, but I can say that a certain amount of rattling is to be expected because of the space needed to allow the ball to turn inside the coupler-especially with an adjustable coupler. With that being said, you can…

We have the MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan, #MA00-03851 that fits roofs 1" to 4-1/2" thick with an opening size of 14" wide x 14" long. What I also like about this option is that it has a built in LED light, it…