Differences Between SumoSprings Kits for 2013 Toyota Tundra

Question

Question:

Would you please explain the difference between two Sumo Springs Solo Custom Helper Spring models? Looking at the SSR-610-47 and SSR-610-54 for my 2013 Toyota Tundra 4-wheel drive towing an 8995 GVWR 35 foot travel trailer. I am using an Equalizer E4 hitch. Want to soften the big bumps and dips on the road.

asked by: John F

0

Expert Reply:

The difference between the two SumoSprings Solos kits for your 2013 Toyota Tundra is the weight capacity for either. The part # SSR-610-47 provides 1,500 lbs of suspension support and the # SSR-610-54 has 2,800 lbs of capacity.

Since you said you wanted a smoother ride the lower capacity # SSR-610-47 is the way to go. Heavier rated springs will make the ride bouncier or rougher.

expert reply by: Jameson C

0

Answer 1

The best way to choose the correct Sumo Springs for your 2001 Toyota Tundra is based off the tongue weight of the trailer you're going to be pulling and the overall capacities on your vehicle. The payload capacity on a 2001 Tundra is a…

view full answer...

Answer 2

Yes, the SumoSprings Solo Custom Helper Springs part #SSR-610-54 are a confirmed fit for a 2008 Toyota Tundra (All Models). They feature a bolt-on install and do a great job of reducing sag/squat from towing and hauling. That said, for lighter load…

view full answer...

Answer 3

Since you're primarily needing the SumoSprings product to support the tongue weight of your trailer when towing, I'd recommend the lower capacity #SSR-610-40. The 1000 lbs of additional support will be perfect to handle the 850 lb tongue…

view full answer...

Answer 4

I recommend using the SumoSprings Solo Custom Helper Springs #SSR-610-47 on our 2016 Toyota Tundra. As you will only be hauling the additional weight a few times a year for a short distance this will provide you with the best ride quality when you…

view full answer...

Answer 5

Since you want support, ride quality, and would prefer an economical price the SumoSprings Solo kit part #SSR-610-54 would be exactly what you want for your 2016 Toyota Tundra. This is the best blend of the things you are wanting and will do a great…

view full answer...

Answer 6

According to my SuperSprings representative, the 1 inch increase in ride height provided by the block won't do much to change the effectiveness of the #SSR-610-47 Solo Custom Helper Springs. As you can see in the photo I've provided, The…

view full answer...

Answer 7

I just spoke with my rep at Timbren. The height of the Timbren Suspension Enhancement System - Rear Axle Item #T62FR for your 2010 Toyota Tundra is 3 9/16 inches for the rubber spring portion and 1 5/16 inches for the bracket with a combined overall…

view full answer...

Answer 8

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 9

You can isolate the break away battery from the auxiliary battery using the Battery Isolation Solenoid #PK5231201. The auxiliary power supply that is needed on this solenoid can be the running lights of your trailer. That way, when your trailer is…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

I spoke with my contact at Hopkins who said this part is designed to fit the 2007 to 2014 Toyota Tundra with the factory 7-way. If your 2014 Tundra came equipped with the factory 7-way plug -- the same configuration as in the photo I have attached --…

view full answer...

Answer 12

The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package part #HM11143395 which is a fit for a 2008 Toyota Tundra will allow an electric brake signal to pass-through for the trailer. The list of functions are as follows: -Stop/Turn…

view full answer...