Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2
(38 reviews)
Price: $199.95
In Stock
Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2
Item # TH713600
Retail:$212.29
Our Price: $199.95
You Save: $12.34
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (38)
- Q & A (0)
- Photos
Thule Roof Rack - TH713600
- Crossbars
- Square Bars
- 2 Bars
- 69 Inch Bar Space
- Thule
- Silver
- Overhang
ProBar Evo crossbars attach to Thule feet to create a heavy-duty, extended-length roof rack that lets you maximize your vehicle's cargo-carrying capacity. Aluminum bars have T-slots in tops and sides for mounting carriers and accessories.
Features:
- Heavy-duty, extended-length crossbars let you build an aftermarket roof rack for your vehicle
- Pair with a Thule foot pack and a fit kit (sold separately) to create a complete roof rack
- Full-length design - bars extend past feet to maximize space for ladders, kayaks, and other recreational or commercial accessories
- Accommodates both T-slot-mounted and clamp-on carriers and accessories
- Tri-slot design provides multiple options for mounting carriers and accessories
- Top T-slot lets you quickly install and remove awnings, carriers, and other accessories
- Side T-slot lets you attach commercial accessories such as eye hooks, baskets, and more
- Bottom T-slot lets you quickly and easily install bars on roof rack feet
- Heavy-duty yet lightweight aluminum bars are durable and rustproof
- Internal BoxBeam structures strengthen the bars without significantly increasing their weight
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 69" long x 2" wide x 1-1/2" tall
- T-slot dimensions: 13/16" wide x 1/8" tall
- T-slot top opening: 3/8"
- Underbar slot: Full length
- Limited lifetime warranty
Thule ProBar Evos let you create a heavy-duty, extended-length aftermarket roof rack for your vehicle. The extra-long design lets you carry more gear than standard crossbars. T-slots on the tops and sides of the bars provide multiple locations for installing channel-mounted carriers and accessories. This is perfect for contractors and recreational enthusiasts who need to carry a multitude of accessories on their roof. The bars are constructed of aluminum with internal BoxBeam structures that make them extremely durable yet lightweight. The ProBar Evos require a Thule foot pack (sold separately) to mount the rack to your roof. Some vehicles - such as those with a naked roof - may also require a vehicle-specific fit kit (sold separately).
Tri-Slot Design
The tri-slot design lets you carry channel-mount accessories on the tops and sides of the bars. Big vacationers can carry kayaks and luggage, overland campers can attach an awning, contractors can carry multiple ladders - the applications for this roof rack are endless.
T-slots on the tops of the ProBar Evos let you mount carriers, awnings, and other channel-mounted accessories. Rubber strips are included for the top T-slots. These strips help keep out water and road grime, reduce road noise, and give the bars a finished, professional look.
T-slots on the sides of the bars let you mount eye hooks, baskets, lights, and other contracting or recreational accessories.
The T-slots on the bottoms of the bars are where you mount your Thule feet. Simply remove the endcaps to slide in your feet, and replace the endcaps when you're done.
The bars are also compatible with most bike, water, snow, and cargo carriers, and other accessories that clamp around your roof rack bars.
Strong, Durable Construction
The ProBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode so you can leave them on your roof year-round.
The bars have plastic endcaps that help keep out water and road debris, and they give the bars a finished look.
Hassle-Free Installation
Installation of the ProBar Evos is quick and easy, and you don't have to do any drilling or vehicle modification. There are bottom T-slots that run the entire length of the bars. Simply insert each foot's mounting nut into the T-slot and slide it to the location noted in the manual included with your vehicle-specific fit kit.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
713600 Thule Pro Bar Evo 175 Crossbars - Aluminum - 69" - Qty 2
This Product Fits The Following Vehicles
- 1979 - 1982 Chevrolet Blazer
- 1983 - 1991 Chevrolet Blazer Full Size
- 1976 - 1996 Ford Bronco
- 1996 - 2024 Chevrolet Express Van
- 2022 - 2024 Nissan Frontier Crew Cab
- 2022 - 2024 Nissan Frontier King Cab
- 1979 - 1982 GMC Jimmy
- 2018 - 2018 Jeep JK Wrangler Unlimited Hard Top
- 1965 - 1997 Toyota Land Cruiser
- 1979 - 1993 Dodge Ramcharger
- 1996 - 2024 GMC Savana Van
- 1979 - 1991 Chevrolet Suburban
- 1979 - 1981 Plymouth Trailduster
- 1979 - 1996 Chevrolet Van
- 1979 - 2014 Ford Van
- 2007 - 2017 Jeep Wrangler Unlimited Hard Top
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 - TH713600
Average Customer Rating: 4.8 out of 5 stars (38 Customer Reviews)
ProBar Evo crossbars attach to Thule feet to create a heavy-duty, extended-length roof rack that lets you maximize your vehicle's cargo-carrying capacity. Aluminum bars have T-slots in tops and sides for mounting carriers and accessories.by: David07/18/2022
After 1 year and several camping trips carrying 2 kayaks and towing a 5'er crossbars have performed wonderfully. Added the Thule Hullavator to help load the heavy Hobie. Great purchase.
by: Terry06/24/2021
2020 Ram 1500
Great to replace a bent crossbar rather than buying a whole new set with the cost of feet included.
by: Robert 01/08/2021
Great product. Super fast shipping and awesome communications throughout transaction. I would recommend.
by: Kurt10/15/2022
Great service from Noah who helped me find what I needed.
by: Anthony 08/29/2022
by: Roland 08/30/2022
by: Klaus 02/03/2023
by: Jeffrey 08/09/2023
by: John 08/15/2021
by: Guy 03/18/2023
by: Martin 07/08/2022
by: Barry03/17/2022
by: Neil 10/11/2021
by: Brad 09/10/2021
2019 Toyota Tundra
by: Brady 12/27/2021
by: John 10/07/2021
by: Dayo s Garage03/27/2023
These bars are the perfect topper for my custom made "over the tonneau" Kayak etc carrier I just built. The bolts to hold the end caps weren't in the package, but I made due until they can be sent. Great looking versatile bars.
by: Stephen02/13/2021
We travel the country in an RV looking for places to kayak fish. We tote 2 Hobie Compass yaks on top of a Wrangler Sahara Unlimited. Have not had any issue in over 15K miles. The yaks fit nicely side by side and are easy to load and tie down. We found this system to be much easier than using J cradles. The racks extension beyond the side of the Jeep has not led to any head bumping accidents.
by: PAM09/15/2020
Product was in stock (unlike other dealers) and shipping was prompt. Exactly what we needed to complete the Thule rack system.
These ProBar Crossbars are exactly what you'll need if you plan to put Hullavators on a Ford F150. Don't listen to Thule! They will try to sell you Thule WingBar Evo 150s and they will be too short. You need 4-8 inches of overhang on both sides to accommodate the Hullavators.
by: Christopher07/31/2020
First, thanks to Steve, who helped me identify that these bars are my only really long bar option for my 450r crossroads feet. He also helped me figure out the best shipping option to get them to me in time to install before a trip but save me some money. I’m completely satisfied with Steve’s customer service!
As for these bars... I bought then do that I could load two canoe side by side. They look good and solve that problem. But I take away a couple of stars for two reasons. First, they’re loud. Even after filling the top and underside channels with the rubber filler strips, I get both a low hum at moderate to high speeds and a high whistle at low to moderate speeds. Actually, it is there all the time but gets drowned out by road noise. I’m going to try to cover up the back channel with black electrical tape and wrap some parachute cord around the front rack to see if that improves the hum. There may be tiny gaps in the rubber strip underneath the bar where it meets the end caps and I’ll also cover those to see if they’re responsible for the whistle. I didn’t have these issues with the old Thule square bar. I’m driving a Honda mini van, so perhaps most people using these have trucks where the bars are placed higher above the roof of the vehicle? One last note. I don’t see many Thule accessories for these t tracks.
So thank you Steve for great customer service. Thule let’s see if I can improve the sound of these bars.
by: Leslie04/22/2023
I purchased this to put on the bed of my 2015 Silverado. I purchased some "gutter" mounts from Summit Rack to use a mounting points. I also puchased the tall mounts for the crossbar so that I could get my cover for my bed open. All of these parts works great togeather. I am really happy with the etrailer.com and all of the communication that I get from them and the pkg arrived when they said and wasn't damaged. Great product and company!!
by: Lloyd09/12/2021
I have used etrailer several times and have always been very satisfied. I find the staff typically have more knowledge then the manufacturer. Prices are reasonable and delivery is fast. No complaints what more would I need.
by: Bob A06/27/2020
Thule products area as good as they come and etrailer.com delivers as promised. The bars are everything we expected and hold up under everything we throw at them. It is nice to have a product perform as expected.
by: Gary09/11/2022
product had been opened before and was missing parts. I thought I was paying for NEW. not reissued products that had been returned and then sold again.
25
38
Show More Reviews
See what our Experts say about this Thule Roof Rack
- What are Slot Dimensions on Top of Thule ProBar CrossbarThe width of the t-slot on top of the Thule ProBars like # TH713600 is 1/2 inch at the top and 3/4 inch at the bottom down in the slot. The height of the slot is .19 of an inch.
view full answer... - Load Stop that Fits Top Channel of Thule ProBar CrossbarsI was able to determine that the Yakima Load Stops part # Y01161 are a fit for the top channel of the Thule ProBar Evo like # TH713600.
view full answer... - Can Thule ProBar Crossbars Attach to Thule Feet TH430RWhile it's no longer made you are in luck as the TH430R was designed to attach to the same bottom channel as what the Thule Pro Bar Evo load bars # TH713600 is designed to attach to so you could replace the bars you have with these and it would work fine.
view full answer... - Can Thule ProBar Heavy Duty Load Bars be Shortened if NeededYes you can trim down the ends of the Thule ProBar Evo Crossbars # TH713600 that you referenced to shorten them as needed.
view full answer... - Thule Bike Racks that Fit Thule ProBar Roof Rack CrossbarsThule ProBar Evos like the part # TH713600 that you referenced are compatible with all of the standard Thule roof bike racks as they are a compatible size with the racks and also the top channels accept the channel mount style of racks like the Thule ProRide part # TH598004. I like the channel mount style as it's an easier and cleaner install so that is the route I would go with. I attached a link to a page as well that has all of the Thule bike racks we offer.
view full answer... - Longer Thule Crossbars that Can Fit on 33 inch Wide Thule Rapid FeetI have a Thule solution that will work but the mounting tracks on the Thule square bars do not run anywhere near the length of the bar to allow a 60 inch bar to fit on feet that are only 33 inches apart. But Thule does have their ProBars like the part # TH713600 which is a set of two 69 inch bars that do have tracks that run the full length of the bars. This would fit your setup currently and would work great.
view full answer... - Recommended Roof Rack For 1990 Ford BroncoFor your 1990 Ford Bronco, I recommend the Thule ProBar Evo Crossbars - Aluminum - 69" Long # TH713600 along with the Rapid Gutter Feet for AeroBlade Crossbars - 5" High # TH65BJ. These load bars offer many channel mounting options for accessories. This roof rack mounts to the rain gutters of your vehicle as you have shown in your picture. I've attached an installation video on a Jeep hardtop to let you see this install.
view full answer...
- Is the Thule Force XT L Rooftop Cargo Box Compatible with the Thule ProBar Evo CrossbarsYes, the Thule Force XT L Rooftop Cargo Box # TH6357B does mount to the ProBar Evo bars like the Thule ProBar Evo Crossbars # TH713600. If Thule states that these can be used together, then they have been tested to work with each other. Thule lists compatible bars and adapters needed for the crossbars. According to their testing the Force cargo box can be used on the ProBar Evo crossbars without an adapter.
view full answer... - Can Thule ProBar Load Bars Fit Thule Rapid Gutter FeetYes, the Thule ProBars like part # TH713600 are compatible with the Thule Gutter Feet part # TH65BJ that you asked about to complete a ProBar roof rack on your 2022 Jeep Wrangler.
view full answer... - Is Thule ProBar Crossbar Compatible with Yakima BigCatch Kayak CarrierWhile the crossbar shape of the Thule ProBar part # TH713600 is a little different it is compatible with the Yakima BigCatch Kayak Carrier # Y04091 that you mentioned. The ProBar has a flat enough top and bottom that the BigCatch would not roll forward or back on it.
view full answer... - Rhino Rack Batwing #RR33200 w/Thule Probar Cross barsAfter speaking with the manufacturer I was told you can slide the the brackets of the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft Item # RR33200 into the T-channels on the Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 Item # TH713600. The T-Channels of the Thule crossbar come with rubber strips that you can cut down once you have your Rhino Rack in place and slide back into the T-channels to help prevent vibration and noise. I've attached...
view full answer... - Thule ProBar Roof Rack Recommendation for 2018 Subaru Forester for Carrying Thule HullavatorTo install the Thule ProBar Evo crossbars like the # TH713600 on your 2018 Subaru Forester all you'd need is the Evo Raised Rail feet part # TH710401 that you referenced. The ProBar Evo is 69 inches which is pretty long so you'd most likely want to cut that down to the correct size for the Thule Hullavator part # TH898 carriers you plan to carry. I'd probably put the bars up at full length first and then mount the carriers and push them as close as you like and then mark the bars where...
view full answer... - Recommended 54 Long Roof Crossbar for a 2013 Audi Q7The Thule ProBar Evo Crossbar System part # TH713600, part # TH710601, and part # TH186025 is a great top of the line option for a 2013 Audi Q7. The ProBar does not have channel stops underneath like most other bars so you can go with an oversized option like the 69" listed above. If this is too large however you can cut it down to your exact specifications.
view full answer... - Recommended Roof Crossbars for a 2022 Volkswagen AtlasNo, the Thule ProBar Evo Crossbars # TH713600 will not fit your 2022 Volkswagen Atlas. Instead, I recommend checking out the Thule WingBar Evo Crossbars # TH711420 with the Evo Raised Rail Feet for Thule Crossbars # TH710401. These crossbars will clamp onto your factory rail, measure 53" long, and has a dynamic weight capacity of 220 lbs.
view full answer... - Can Thule ProBar Evo Crossbars 69 Be Used On 2014 Chevy Silverado 1500?I confirmed with Thule that you can indeed use Thule ProBar Evo Crossbars 69" # TH713600 on your 2014 Chevy Silverado 1500 Crew Cab. You will also need Evo Clamp Feet # TH710501 and Fit Kit # TH145105 in order to install these bars. These ProBars have an integrated channel on top which allows for easy installation of t-slot accessories. I attached a couple demonstration videos to help you out with the installation process.
view full answer... - Why are So Many Roof Racks Rated Only for 165 lbsThe reason the majority of roof racks out there right now (December 2018) are rated for 165 lbs is because for the longest time there was no reason to test them past that point. It is very rare to find a vehicle with a roof weight rating that is over 165 lbs so the max weight rating for entire roof rack systems just kind of stopped right there. With that being said, roof rack manufacturers have recently been looking into testing their systems at higher weights to see what they can hold....
view full answer... - Will Yakima Baseline Towers Work with Thule ProBar Evo CrossbarsI do have an option for you but the Thule ProBar Evo Crossbars like part # TH713600 are not compatible with the Yakima Baseline Towers. In order to use the Thule ProBar Evo Crossbars you'll need the Evo Clamp Feet for Thule Crossbars part # TH710501 and subsequent vehicle specific fit kit. The other option would be to simply use the Yakima HD Crossbars like part # Y01158. I have attached a full list of sizes below for this crossbar. The channel dimensions which the crossbars mount to are...
view full answer... - 70 inch Crossbar Roof Rack that Fits 2022 Subaru Forester for Canoe CarrierTo install a roof rack on your 2022 Subaru Forester that would give you crossbars close to 70 inches you'd need to go with a Thule ProBar roof rack that consists of part numbers # TH713600 and # TH710401. This would be only option for a rack on your vehicle with bars this long. Then for a canoe carrier setup you could use the Yakima KeelOver canoe carrier part # Y04069 which comes with hardware that can attach to the top of the ProBar channels.
view full answer... - Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru OutbackThule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
view full answer...
- Thule 60 Inch Crossbars for 2020 Subaru OutbackThe solution for you is to use the ProBar Evo instead of square bars because as you stated the bottom slots of the square bar won't accommodate your fit. The Thule ProBar Evo has the slots that run the full distance of the bars, so the bars can be cut to a custom length. I recommend the Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 which will work with both the carriers you mentioned and will give you your desired length. You will need to cut them to your custom...
view full answer... - What is the Difference Between the Thule Traverse 480 and Rapid Travers 480R?The Thule Traverse 480 has been discontinued and is only compatible with square load bars which are also discontinued. The Thule Rapid Traverse Foot Pack # TH480R are compatible with the Aero Style bars like the AeroBlade or WingBar Evo, the ProBar Evo bars, and the SquareBar that has a slot on the underside. I've linked the page to all these crossbar options to assist. The ProBar Evo # TH713700 and # TH713600 are the only crossbars that can be cut to custom lengths like the older square...
view full answer...
- Crossbar for Thule Podium Foot that Fits Leer Truck Camper ShellThe Thule Aeroblade crossbar was replaced by the improved WingBar Evo which will fit the feet and fit kit you have already. For that we have the 60 inch long bar set # TH711520 which would work great. Or if you need longer we have the ProBar Evo style part # TH713600 which is 69 inches long.
view full answer... - Will Thule Hullavator Work With Thule ProBar Evo CrossbarsI have a replacement option for you, but I reached out to my contact at Thule and he confirmed that the older Thule Hullavator 897XT you have will unfortunately not fit your new Thule ProBar Evo Crossbars # TH713600. He mentioned that unfortunately the Shim # TH56JV you mentioned will not allow the 897XT to work on your crossbars. Instead I recommend selling your current Hullavators and replacing them with the new Thule Hullavator # TH898 as it will slide into the t-track channels on your...
view full answer... - Roof Rack Tower/Feet Compatibility with the Thule Hullavator Pro Kayak CarrierI reached out to my contact at Thule and they don't test them on any other roof racks. We just started carrying the Malone roof racks a few months ago, so we haven't test fit these products together to my knowledge. Can you send me a photo of the issue so I can help you troubleshoot it?
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Kathleen M
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Carrie F
Written by:
Matthew S
Video by:
Zach D
Video by:
John S
Test Fit:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
1/9/2022
Bars are still working out awesome. The only time I notice any noise is when cartooning item with cover. It is the cover that makes noise. Not the bars. This has been remedied by placing foam pool noodle between lead bar and roof. If you use thicker size noodle just wedge in place. If using thinner size pool noodle a wrap or two of duct tape holds in place. Viola no sound from above.