Fulton Caster Wheel Swivel Jack for Haulmark Flex Enclosed 4 x 6 Trailer

Question

Question:

Would this jack work on a Haulmark Flex 4x6 trailer to aid in rolling?

asked by: Tom H

0

Expert Reply:

You can use the Fulton Snap-Ring Swivel Jack # F1410050149 on a small enclosed trailer like the Haulmark Flex FL4X6DS0 as long as the tongue fits the jack mounting bracket which is made for 3 x 5-inch tongues. The Haulmark site does not include specs for the tongue of this trailer. Since this trailer has a 1000-lb-rated axle the 400-lbs rated jack should be sufficient.

expert reply by: Adam R

0

Answer 1

We've got a couple of options for jacks with a wheel that will bolt to your 3" x 2" trailer tongue. Both have the ability to swivel up when you are towing your trailer. Which one you choose is going to depend on the terrain you store…

view full answer...

Answer 2

Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs Item #F1410050149 would require some modification to fit a 2 x 2 inch frame. It could be done but it would void the jack warranty. I recommend using trailer jack #FTJ120W0301. It comes…

view full answer...

Answer 3

You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Fulton Caster Wheel Swivel Jack for Haulmark Flex Enclosed 4 x 6 Trailer

Product Page this Question was Asked From

Continue Researching