Draw-Tite Class III Hitch 75218 Installation on 2016 Audi Q3 for Using Hitch Bike Rack

Question

Question:

Hello, I am looking at the Curt Class 2 for my 2016 Q3 Quattro prestige edition. It looks like there is an OEM version now but its very expensive and I only want this for a bike rack and not true towing. My main concern is will the Curt look similar and be placed like the OEM version. I just want it to look right and similar to the OEM if possible. I dont need all of the things that come with the OEM version. Please give me your advice. Thanks!

asked by: Anthony

0

Expert Reply:

All aftermarket hitches made for your 2016 Audi Q3 are shown on the linked page. These options include both 1-1/4-inch Class II and also 2-inch Class III type hitches. Since both install in the same manner I recommend one of the 2-inch models, either Curt # C13238 or Draw-Tite # 75218, since these will offer broader compatibility with the available bike racks and also a higher weight capacity.

Both of these 2-inch hitches will require some trimming of the rear fascia but neither required drilling. But since you want to use the hitch specifically for a bike rack I suggest the Draw-Tite # 75218 since it does NOT require you to use a support strap # 18050 as the Curt hitch does.

One of our customers submitted a photo of their completed install and I linked this to show you the clean appearance, which is quite close to the OEM install.

If you need help selecting a 2-inch hitch bike rack please let me know the number of bikes, their types (beach cruiser, step-thru frame, etc) and I will be glad to offer recommendations. In the meantime the linked bike rack article may be of interest.

expert reply by: Adam R

0

click to enlarge

Answer 1

We don't have a video of the Draw-Tite Max-Frame Trailer Hitch Receiver #75218 on your 2018 Audi Q3. The biggest thing to note is the installation requires the permanent removal of the bumper beam and the hitch will replace that bumper beam…

view full answer...

Answer 2

I spoke with my contact at Draw-Tite and was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver #75218 will fit your 2013 Audi Q3. This is custom-fit for your vehicle and will use existing holes in the Q3 frame for a no-drill…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75218 is a great option for a 2017 Audi Q3. I do see a few reviews of others using this hitch for bike racks without reporting issue of the safety chain loops interfering with the hitch pin. That…

view full answer...

Answer 4

The Draw-Tite Max Frame Trailer Hitch, #75218, is the confirmed fit hitch for your 2015 Audi Q3. The hitch does have a tongue weight rating of 450 lbs and you will not need to use a stabilization strap on the Draw-Tite product. The only permanent…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Draw-Tite Class III Hitch 75218 Installation on 2016 Audi Q3 for Using Hitch Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching