4-Way Trailer Wiring Harness Recommendation for 1984 Chevy C10

Question

Question:

I have an 84 Chevy c10. With no trailer break light hook ups. How do I wite it up for that/what parts do I need

asked by: Andrew M

0

Expert Reply:

For trailer wiring for your 1984 Chevy C10 for just the trailer lighting you'd want the part # 118311 which covers all of the trailer lighting functions.

expert reply by: Jameson C

0

Answer 1

The vehicle tail light wiring harness is located along the inside of the left rear frame rail. The harness will have a connection point with connectors matching the ends of the T-connector, #118311, that you referenced. I added a photo of this…

view full answer...

Answer 2

The best way to obtain both a 4 and 7-way trailer connector on an RV with factory 7-way is to replace it with the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part #HM40975. There will be no cutting or splicing involved with this…

view full answer...

Answer 3

First, you will need a 4-way connection. The purpose of this connection is to operate your stop, turns, and tail lights of your trailer. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118311 will quickly and easily allow an…

view full answer...

Answer 4

To control your trailer's brakes, with your 1983 Chevy K10, you are going to need a couple of wiring harnesses. The first one is the T-One Vehicle Wiring Harness item #118311. This custom-fit T-One connector plugs into your Chevy's wiring…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...