Bike Rack Recommendation for Securing Pedego Boomerang Step Thru E-Bike

Question

Question:

will the TH9032 accommodate the Pedego step-thru Boomerang e-bike? Thanks,

asked by: Bob C

0

Expert Reply:

Yes, the Thule Easy Fold part # TH903202 will fit and work well on your Pedego step-thru Boomerang e bike. This rack is designed for attaching to e bikes like yours that have a very low step through bike frame. If you check out the picture I attached you can see the rack securing a very similar style bike.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I pulled up some pictures of your Pedego Boomerang and it does have a very low stop through frame. It might be the lowest one I have ever seen actually. What you can do is use a bike frame adapter like part #64005 to provide a horizontal attachment…

view full answer...

Answer 2

In order to load your Boomerang bike on the Hollywood Racks Sport Rider #HLY84FR you will need to use a bike adapter bar, #64005, so the hook will be able to hold onto the bike. Like you said the frame tube is very low on that bike so the hook on…

view full answer...

Answer 3

In order to carry heavy e bikes, you will need a 2" hitch bike rack that can carry up to 60lb bikes. My recommendation is the RockyMounts MonoRail 2 Bike Platform Rack - 2" Hitches - Tilting - Wheel Mount, part #RKY10004. This bike rack is…

view full answer...

Answer 4

The only bike rack we offer compatible with a Pedego Boomerang that doesn't require lifting is the Thule EasyFold XT 2 E-Bike Platform Rack part #TH903202 which is a phenomenal option. The Thule EasyFold as mentioned has a ramp for easy loading,…

view full answer...

Answer 5

The best e-bike rack for your Pedego Boomerang with the lower bike frame at the rear of a fifth wheel is the Swagman E-Spec part #S94FR as it's approved for this application, has the weight capacity for e-bikes and can grab the bike frame style…

view full answer...

Answer 6

If you unlock and remove the old lock core then the knob should then just spin off and you can repeat the same steps to install the new knob, Replacement Locking Knob for Thule Bike Racks part #TH79JV. Please note, you will need the change key to…

view full answer...

Answer 7

For your electric bikes with 4 inch tires, the Thule EasyFold XT 2 Electric Bike Platform Rack #TH903202 will require the use of Fat Bike Straps for Thule EasyFold XT #TH985101 while the Hollywood Racks Sport Rider SE #HLY84FR will not because this…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...