Dexter Torflex #10 Axle Side-Mount Frame Installation Hardware Kit
(9 reviews)
Price: $79.81
In Stock
Dexter Torflex #10 Axle Side-Mount Frame Installation Hardware Kit
Item # DX54FR
Retail:$85.02
Our Price: $79.81
You Save: 6%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Dexter Accessories and Parts - DX54FR
- Trailer Axles
- Installation Kits
- Dexter
Easily install your Dexter #10 Torflex axle on your trailer with this hardware kit. Includes both left- and right-side mount hangers and all required hardware. Bolt-on frame installation makes axle maintenance easy.
Features:
- Easily install your Dexter #10 Torflex axle on your trailer with this hardware kit
- Brackets are welded onto the frame - axle bolts to brackets
- Bolt-on frame installation makes axle maintenance easy
- If your axle needs to be replaced it only needs to be unbolted from the side-mount hangers to remove
- Includes:
- (1) 003-176-00 Left-side mount hanger
- (1) 003-177-00 Right-side mount hanger
- (4) 005-111-00 5/8"-0.179" Washers
- (4) 006-126-00 5/8"-18 Hex lock nuts
- (4) 007-177-00 5/8"-18 x 1-1/2" Grade 5 hex cap screws
- Made in the USA
A/P-166-00 Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit
Video of Dexter Torflex #10 Axle Side-Mount Frame Installation Hardware Kit
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Dexter Axle Trailer Axles Parts - Torflex Axle Installation Hardware Kit - DX54FR
Hey everyone, I'm Ellen here at etrailer.com, and we're going to be taking a look at the Dexter Axle Torflex #10 side angle mount or side mount for your axle. These are going to be frame-mounted hangers to support that axle on your trailer. So this flat side is going to mount to your trailer. You're going to have to weld that on there. And then the bolt holes will allow you to mount your axle to it. It gives you the hardware to do that mounting to the axle, so we'll get four bolts, washers, and four nuts.
We'll have our left and right side brackets. The orientation of these is going to kind of depend on your particular axle, but it's either going to go like this or like that, so which ever one matches up better.As far as the specs with this, it is going to give you that easy place to mount your axle to so it makes it easier to take it apart. Our hangers here are about 11 inches long in total. The distance between those mounting holes center-to-center is about 8 inches, and then between these two is about an inch and an eighth. They are a little offset from each other.
The opening here is about 4 inches, and the width of our brackets is about 2-3/4 inches.Our bolts are Grade 5 hex cap screws. These are going to be 5/8, 18 x 1-1/2 inch bolts, and then the matching hex nuts for those. This kit is made in the USA.That's about all there is to it for our look of the Dexter Axle hangers. I hope this video has been helpful. Thanks for watching and we'll see you next time..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Dexter Torflex #10 Axle Side-Mount Frame Installation Hardware Kit - DX54FR
Average Customer Rating: 4.8 out of 5 stars (9 Customer Reviews)
Easily install your Dexter #10 Torflex axle on your trailer with this hardware kit. Includes both left- and right-side mount hangers and all required hardware. Bolt-on frame installation makes axle maintenance easy.by: Sean 08/16/2023
Called customer service and they helped me get the right brackets the first time. Able to give me full dimensions of the part to make sure. Will he buying my stuff from here from now on.
by: Peter 03/25/2024
by: Charles09/19/2022
by: William 09/10/2022
by: 12/05/2023
by: Paul 07/31/2022
by: Trenton 03/02/2023
by: Gene 03/07/2021
by: Julie 07/21/2022
9
9
See what our Experts say about this Dexter Accessories and Parts
- What Material is Dexter Axle Torflex #10 Axle Side-Mount Frame Hardware Kit # DX54FR Made OfI spoke to my contact at Dexter Axle, they told me the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit # DX54FR is made of steel. They also said that there is not an aluminum alternative.
view full answer... - Correct Lift Kit for a #10 Torflex Single Axle on a Lance 1575 Travel TrailerFrom what I could find on your 2014 Lance 1575 travel trailer, it has a 2775 lb. dry weight so you most likely have a #10 Torflex axle. With that in mind, since you have a single axle trailer you would need the Torflex Lift Kit # K71-707-01 which provides 2-5/8" of lift. Note that if you have it mounted from the top, then you also need the Side-Mount Frame Installation Hardware Kit # DX54FR to complete the installation. Also note that the lift kit cannot be used if the Torflex axle has...
view full answer... - Measurements For Mounting Bolt Holes On Torflex Lift Kit # K71-707-02The holes on the Torflex Lift Kit # K71-707-02 are spaced 8" on center for the side holes and the bottom holes. These holes are slightly larger than 5/8" as they use 5/8" mounting hardware. The side mounting holes are offset approximately 3/8" off center to fit the Dexter Torflex #10 Axle Side-Mount Frame Mounts # DX54FR
view full answer...
- How to Tell What Number Torflex Axle is on TrailerThe Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle and having a GVWR of 6,253 lbs I'd guess that you have 2 of the #10 Torflex axles on your trailer so you'll need the lift kit # K71-707-02. This gives you a 2-5/8" lift and will fit unless you have 3" high profile brackets. If your axles...
view full answer... - Lift Kit Compatible with Dexter #10 Axles on EZ Hauler Trailer with Tandem AxlesFor your Dexter #10 torsion axle, the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02 is the correct fit. We don't have anything compatible with top-mounted torsion axles so you would first need to weld on the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit # DX54FR for each axle. With this mount welded to your frame you would them be able to use the lift kit.
view full answer... - Recommended Lift Kit For 2010 Forest River R-Pod 176 With Dexter Torflex AxleYour 2010 Forest River R-Pod 176 has a 3500lb Dexter Torflex axle so the correct lift kit is the Dexter Torflex Lift Kit # K71-707-01 which fits your axle as long as it has side mount bracket securing it to the frame of your R-Pod and not top mount brackets. If it has top mount brackets you can have the Side Mount Install Kit # DX54FR welded to the frame of your trailer so that the lift kit can be installed. I included videos of the products mentioned for you to take a look at.
view full answer... - Lift Kit and Brackets for Top Mount Torflex 3500 lb Axles on Horse TrailerFor your horse trailer with Dexter Torflex 3500 lb axles, you will need the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02 along with two sets of the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit # DX54FR which will be welded to your trailer frame. I've attached some videos and a customer photo of the kits installed to assist.
view full answer...
- Lift Kit for Trailer with Dexter Torflex 3,500 Torsion AxlesIf you trailer already has Dexter 3,500 lb torsion axles installed already there would be no need for additional brackets like the part # DX54FR to install the lift kit part # K71-707-02. That bracket kit is for installing the axles but your trailer would already have them.
view full answer... - Correct Lift Kit for #10 Torflex Single Axle on Lance 1575 TrailerA #9 Torflex axle is rated for 1,000 - 2,200 lbs so since your Lance 1575 weighs well over 2,200 lbs dry I'm confident you have a #10 Torflex axle (which can be rated for 2,300 - 4,000 lbs). With that in mind, since you have a single axle trailer you need the Torflex Lift Kit # K71-707-01 which provides 2-5/8" of lift. Please note that if you have it mounted from the top then you also need the Side-Mount Frame Installation Hardware Kit # DX54FR to complete the installation. Just please...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.