2015 Jeep Grand Cherokee Trailer Hitch and Wiring Recommendation

Question

Question:

I would like to install the Curt 13065 Hitch as it appears to have the best reviews. Does the Curt 55774 Wiring connector install to the 13065 hitch? Your video shows it easily installing on a draw-tite.

asked by: Mitch

0

Expert Reply:

When installing the Curt 7-way harness part # C55774, which is a fit for your 2015 Jeep Grand Cherokee, you actually want to attach the mounting bracket to the rear bumper of your vehicle and not to the hitch. Drilling into a hitch tube actually voids the warranty.

The Curt hitch part # C13065 is a fit for your vehicle as well and would be a great hitch solution.

expert reply by: Jameson C

0

Jake R.

4/13/2020

I ordered a Curt T connector, part #55774. I have a draw-Tite hitch already in place that has holes for the mounting bracket. Will I need to remove the hitch to attach the connecting mounting bracket?Thank you.

Reply

Chris R.

4/14/2020

From what I can see it looks like you should still be able to access the top of that mounting plate on the Draw-Tite Hitch for bolting on the Curt 7-Way # C55774. You shouldn't need to remove the hitch.

Reply

Answer 1

We do not have any installs pics for the Curt Hitch #C13065 on a 2014 Jeep Grand Cherokee Altitude, but we do have install pics on a similar Grand Cherokee. I attached these pics, install instructions and an install video for you to check out.…

view full answer...

Answer 2

The square tube part #C13065 will be more hidden as it's cross-tube is up higher and the only thing that hangs down and is visible is just the hitch opening. I attached a picture that shows this hitch installed and you can see what I mean.…

view full answer...

Answer 3

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #C13065 has a gross trailer weight capacity of 5,000 pounds. As long as the combined weight of the trailer and the 2003 BMW do not exceed that capacity then the hitch can handle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...