Recommended Trailer Wiring Harness for 2015 Jeep Cherokee Latitude without Tow Package

Question

Question:

My 2015 latitude does not have a tow package - is this the right harness

asked by: Kirk

0

Expert Reply:

Yes, the Tekonsha T-One Vehicle Wiring Harness # 118605 referenced in your question is confirmed to fit your 2015 Jeep Cherokee Latitude without the towing package. This custom harness will install by connecting directly to the built-in ports located behind the driver and passenger side tail lights. It will provide you with a 4-Way connector at the rear of your Jeep to connect with and power a trailer's signal lights.

I have attached an installation video on your vehicle that you can use for reference.

expert reply by: Chris R

0

Answer 1

I would be happy to help you but the etrailer Hitch item #e73ZR fits the 2019 and newer Jeep Cherokee's so it's not going to be much help determining which has better ground clearance. The hitch with the most ground clearance, that…

view full answer...

Answer 2

We have a few hitches that fit your 2015 Jeep Cherokee. I recommend sticking with a Class III trailer hitch because you'll get all the capacity available from your Jeep and also the 2 inch opening is more common so more accessories are…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...