Does Rear Panel of 2017 Subaru BRZ Come off To Install Draw Tite Hitch

Question

Question:

Regarding part # 24935. Do you remove the rear panel to install? What is the part # for the correct light hookup?

asked by: Ray S

0

Expert Reply:

Yes, to install the Draw Tite hitch part # 24935 that you referenced the rear panel does have to come off. In the instructions link that I attached this entire process is covered.

For trailer wiring you then would want the part # 118629 which is a confirmed fit for your 2017 Subaru BRZ and would work well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, when installing the EcoHitch Stealth Trailer Hitch Receiver part #306-X7293 on the 2019 Subaru BRZ the bumper panel needs to be removed with a flat head tool like a screw driver or part #ALL648544. The EcoHitch will be attached to the impact bar…

view full answer...

Answer 2

The EcoHitch Stealth Trailer Hitch Receiver #306-X7293 is a fit for your 2019 Subaru BRZ. The hitch is a hidden design to allow you a very clean look. The hitch cross tube is concealed behind the rear bumper and the receiver is removable when not in…

view full answer...

Answer 3

Curt trailer hitch #C11379 has a shipping weight of 33 pounds, the heaviest of the hitches for your 2014 Scion FR-S. The hitches are designed to fit models that have the stock exhaust. They have not been tested on alternate exhaust systems. It is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...