Is the Shank on Curt Hitch Extender # C45796 Solid or Hollow

Question

Question:

Is the shank on curt hitch extender 45796 solid or hollow?

asked by: Jerry

0

Expert Reply:

The Curt Extender for 2" Receivers -18" Long Item # C45796 has a solid shank. I have linked a video review of this extender for you and at about the 22 second mark you can see that the shank is solid.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I would love to help you with this Adam, but I am going to need a bit of information on your exact setup to determine what all you will need. Can you tell me how heavy your car trailer is when loaded and how much extension you will need? Also I will…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 7

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 8

The Curt High-Low Adapter #C59KR is designed for flat towing only. Curt doesn't even test it for accessories to give it a tongue weight rating. The Roadmaster #RM-048-4 is the most comparable with a distance of 9-5/8" from hitch pin to hitch…

view full answer...

Is the Shank on Curt Hitch Extender # C45796 Solid or Hollow

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching