Will Reese Titan Hitch Extender Work with 2017 Chevy Silverado 2500 with Factory 2-1/2 Inch Receiver

Question

Question:

What is the difference between the Reese and Curt hitch extender/reducer besides the cost?

asked by: Carol G

1

Helpful Expert Reply:

For your 2017 Chevy Silverado 2500 with factory 2-1/2 inch receiver, the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long # RP45292 will work great for you without any weight distribution needed. You may want to add a wiring extension like the 7-Way Connector 7' Loop # 20027 which can be shortened for your application or the TorkLift Wiring Harness Extension for 36" SuperTruss Hitch Extender - 7-Way RV # TLW6036 which already fits.

You may also want to consider a lock like # C23519 to secure your investment.

expert reply by: Jason S

1

Carol

9/7/2017

What is the difference between the Reese and Curt hitch extender/reducer besides the cost?

Reply

Jason S.

9/7/2017

To compare the Reese Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long # RP45292 to the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048 there are few differences as they are very similar. They are rated for the same distances and weights, the only real difference is the safety chain loops and bracket are stronger on the Reese unit and that unit comes with the trim and cap. I recommend the Curt product because it has the same capacities, is less expensive, and is made in America.

Reply

Answer 1

The difference between a tube extension and a hitch extension is splitting hairs on terms. The difference between a combo bar that you could drill a hole in and an extension is the finish. The extensions have a powder coated finish and the combo bars…

view full answer...

Answer 2

Since you are using a weight distribution system similar to Equal-i-zer Weight Distribution System #EQ37100ET, the product we have with the longest shank bar length that will work with unit is the Equal-i-zer Weight Dist Shank #EQ90-02-4900. Its…

view full answer...

Answer 3

I am assuming by heavy duty sway control system that you have a weight distribution system, something like part #EQ37120ET. If that is the case then your best option to consider would be an extended shank. The longest shank we offer is the…

view full answer...

Answer 4

The Curt hitch extender part #C45048 that you referenced does not come with an anti-rattle device but using one like with the #63232 which also has a lock built into it would be a great idea to limit movement like you mentioned.

view full answer...

Answer 5

The Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches #C45048 and the similar Reese Hitch Box Extension and Reducer #RP45292 can only be cut down to 24" and not 28". These have only been tested at those lengths and there…

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 11

This will depend on if you have disc or drum brakes on your triple axle boat trailer. Disc Brake Kit #HS381-9067 Drum Brake Kit #HS381-9066 Each kit contains the correct electric over hydraulic actuator, 7-way wiring and breakaway components. If you…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...