Locating Replacement Hubs for Triton 2 Place Snowmobile Trailer
Question:
What hub kit do I need to replace the ones on the trailer and tires and rims
asked by: Jacob L
Expert Reply:
In order to find the correct replacement hubs for your Triton 2 Place Snowmobile Trailer, you will need to first determine a few things using your existing hubs or spindle.
I first recommend pulling the hubs on your trailer to check for the numbers that should be stamped onto the inner and outer bearings. If you cannot locate the numbers or if they are illegible, you can also measure the spindle at various locations where the bearings sit. I recommend using a digital caliper like # PTW80157, as the measurements will need to be exact. I have included an image that shows where these measurements should be taken. The bearing information is needed to ensure the new hub will fit your trailer's spindle.
You will also want to determine the bolt pattern on your hubs. I have attached an article that explains how to measure this on your hubs. Lastly, noting the axle capacity on your trailer will also help narrow down the possible choices.
For example, the etrailer.com Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is designed for 3,500 pound axles and features a 5 on 4-1/2 inch bolt pattern. It uses the # L68149 inner bearing and # L44649 outer bearing.
I have attached a link that will take you to our available selection of trailer hub and drum assemblies, along with a couple additional articles on trailer hubs and bearings that you might find helpful.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: 20.5 x 8 10 tire and rim
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: 2-1/2" Long Torx Floor Screws, 40/Pkg
- Shop: 1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Q&A: Correct Replacement Hub for 2005 Karavan KKR-1800-70
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Replacement Trailer Idler Hub for Triton Snowmobile Trailer with Dexter Torsion Axle
- Q&A: How to Pick Out Replacement Bearings/Bearing Kit for 2004 Triton XLT
- Q&A: Replacement Hubs with L44649 Bearings on Snowmobile Trailer
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Search Results: dexter 8 259
- Search Results: 8~259~5uc1~ez
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Search Results: lug nuts
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Trailer Hitch
- Q&A: Replacement Hub for Triton Trailer Model Elite 22-101
- Shop: Trailer Wiring
- Search Results: triton
- Search Results: l44649
- Search Results: 2 inch hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams