How to Pick Out Replacement Bearings/Bearing Kit for 2004 Triton XLT

Question

Question:

I have a 2004 Triton XLT PWC trailer with a Reliable Axle that needs new bearings, seals and grease fitting caps you tell me which bearings/bearing kit to buy?

asked by: Robert C

0

Expert Reply:

To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them.

Or, you can measure the spindle where the bearings and seal ride so that we can pick you out the correct bearings that would fit the spindle. With either info mentioned I can get you the correct parts you'd need.

expert reply by: Jameson C

0

Answer 1

Thanks for the info and pictures of your hub! Based on that the correct replacement is the part #8-257-5UC3-EZ which matches the bolt pattern, drum size, and bearing info you listed as well.

view full answer...

Answer 2

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

view full answer...

Answer 3

It sounds like you are wanting a BTR Spindle compatible hub for 8" wheels. A BTR spindle uses inner and outer bearings L44649 so in this case you would want Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased…

view full answer...

Answer 4

The hub you have similar to the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles part #8-247-50UC3 uses the #84 spindle like the Square #84 Spindle for 3,500-lb Trailer Axles part #TRU47FR. It will use the Bearing Kit for #84 Spindle part…

view full answer...

Answer 5

In order to find the correct replacement hubs for your Triton 2 Place Snowmobile Trailer, you will need to first determine a few things using your existing hubs or spindle. I first recommend pulling the hubs on your trailer to check for the numbers…

view full answer...

Answer 6

We actually carry a replacement for the Dexter 8-259 Trailer Hub, it's the Easy Grease Trailer Idler Hub Assembly part #AKIHUB-545-2-EZ-2K.

view full answer...

Answer 7

Based on the information and pictures you provided (thank you!) either the etrailer.com 2K Trailer Idler Hub Assembly #AKIHUB-545-2-EZ-2K or the Galvanized #AKIHUB-545-2-G-EZ-2K you referenced would work great as replacements, the only physical…

view full answer...

Answer 8

The correct replacement hub for your 2005 Karavan KKR-1800-70 is the Easy Grease Trailer Idler Hub Assembly part #AKIHUB-545-2-G-EZ-2K. This hub has a galvanized finish which is best for saltwater and it comes with bearings, races, seal, and grease…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

How to Pick Out Replacement Bearings/Bearing Kit for 2004 Triton XLT

Product Page this Question was Asked From

Continue Researching