Trailer Hitch Receiver and Bike Rack for a 2010 Chrysler Sebring Convertible

Question

Question:

Hello I have a 2010 Chrysler Sebring hard top convertible and looking at finding the relevant hitch/ tow ball etc for this vehicle. I may be towing a trailer at times but mainly to hook up a bike rack. Could you please advise the parts I need and corresponding numbers # . Kind regards

asked by: Richard

0

Expert Reply:

You'll need a couple things to tow, the first of which is a hitch. For the 2010 Chrysler Sebring, the Draw-Tite Class I Sport Frame, part # 24871 is a confirmed fit. It has a no-drill installation process, so it should be easy for you to install. I've included a video of it being installed on a 2008 Chrysler Sebring soft top convertible, so you can get an idea of the installation process.

If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well. Use # 118444 which plugs in behind both tail lights. Also the recommended ball mount is the Draw-Tite # 3594. It gives you 4 inches of rise. The compatible hitch ball is # 19256 for a 1-7/8 inch ball and # 19258 for a 2 inch ball.

For a bike rack, you'll want to be aware that Class I hitches are only rated to carry two bikes because of the weight distribution's interaction with the hitch. The natural jostling that occurs when using a rack can cause damage to the hitch or vehicle if a third bike is added to the hitch. Additionally, many Class I hitches have a stopper that will prevent incompatible hitches from being installed, so be aware to look for Class I rated, 1-1/4 inch compatible bike racks. I've included a link below that takes you to our selection of hitch mounted bike racks already filtered to these specifications.

Because you're driving a convertible, I do recommend a lower set platform rack to avoid damage to the vehicle and to keep the streamlined look of the convertible. An extremely popular rack is the Curt # C89JR. This is a wheel-mounted rack that is appropriate for a wide range of styles and wheel bases. It also has a unique, V-shaped style making it stand out as a style choice. Additionally, its compatible with up to Class III hitches and 2-inch receivers, giving you flexibility to mount it to another vehicle if the need arises.

For this rack, I also recommend picking up an anti-rattle hitch lock, part # 63232 to and 10-foot Cable Lock, part # e98891. These together will work to improve the security of the rack and bikes, letting you worry less about the bikes if you take a break on the drive home.

I've included videos of all of these parts in action so you can get an idea of how they work, as well as a link to help articles on installing, how to set up a towing system and how to set up and troubleshoot wiring on a vehicle equipped to tow.

expert reply by: Jacob W

0

Answer 1

I am assuming you meant Yakima Holdup part #Y02443 as there isn't a Standup bike rack they offer. This is a pretty similar bike rack to the Curt E-Bike Rack part #C89JR in a few ways as they are both platform racks that use wheel mounts to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Trailer Hitch Receiver and Bike Rack for a 2010 Chrysler Sebring Convertible

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching