EcoHitch Trailer Hitch Options for 2015 Toyota Sienna

Question

Question:

Is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2inch also available in a 1.25inch receiver? Can you provide the dimensions each project from the bottom of a 2015 Toyota Sienna?

asked by: Jeremy

0

Expert Reply:

All hitches offered for your 2015 Toyota Sienna are shown on the linked page. The only EcoHitch option is the 2-inch version # 306-X7255.

We will always recommend a 2-inch hitch over a 1-1/4-inch since there will be many more available accessories made for the larger hitch size. Also a 2-inch hitch will offer higher weight capacity for whatever your requirement is, either towing a trailer or using a hitch-mount bike rack or cargo carrier.

Actual height of a trailer hitch receiver tube above ground level varies based on vehicle passenger and cargo load, overall suspension condition and tire size and condition. Your Sienna could have been equipped with either 17-, 18- or 19-inch wheels. For an approximation you can figure that the bottom of a 2-inch hitch receiver tube will be 3-inches below the bottom of the bumper cover; a 1-1/4-inch hitch tube will be about 2-1/2-inches below.

expert reply by: Adam R

0

click to enlarge

Answer 1

If by "flat" bike rack, you are referring to a platform rack, then I have a great recommendation for you. It's the Yakima HoldUp Bike Rack, part #Y02443-2. This rack can hold up to 4 bikes with a weight capacity of 50 pounds…

view full answer...

Answer 2

Actually the Draw-Tite #76112, Curt #C13343, etrailer #e98853, and EcoHitch #306-X7255 all install so that only the receiver is showing. A lot of people like this look instead of having a thick piece of steel underneath their vehicle as well. You are…

view full answer...

Answer 3

I do have a trailer hitch for your 2018 Toyota Sienna Limited AWD with a hidden cross tube, the EcoHitch Hidden Trailer Hitch Receiver part #306-X7255 but EcoHitch does not offer a trailer hitch with hidden receiver tube, the EcoHitch Stealth Trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...