Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer

Question

Question:

I see you have 3 different harness options. Is it just a brand thing or is one actually better than the other?

asked by: David

0

Expert Reply:

There are three trailer wiring harnesses that fit the 2011 Jeep Liberty. The Tekonsha # 118554, Curt # C56334, and a Hopkins # HM11142485.

All three provide a 4-way connector and install by plugging in behind both tail lights. There is also a hot lead wire that will be run to the battery and a fuse to be installed. Everything for the install is included with each harness. Then the connector will is stowed beneath the Jeep near the trailer hitch.

Of the three I recommend the Tekonsha because we have better luck with their converter boxes. Also, the price is a little nicer than the others.

If you don't already have a trailer hitch receiver on the Jeep I recommend the Draw-Tite # 75578. This is a Class III, 2 inch hitch receiver. I've linked an install video for you.

You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.

One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.

For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.

I've also included links to some articles on towing that you might find helpful.

expert reply by: Charles S

0

Answer 1

We do sell roof rack kits that fit the factory flush mounted rails you have on the top of your 2010 Jeep Liberty. For a set of Malone crossbars confirmed as a fit similar to what you referenced you'd want the part #MPG216 which will work…

view full answer...

Answer 2

Both the Tow Ready Custom Fit Vehicle Wiring for the 2008 Liberty by Jeep, part #118381, and the Draw-Tite Custom Fit Vehicle Wiring for the 2008 Liberty by Jeep, part #118554, will work on a 2008 Jeep Liberty. The difference is that the #118554 is…

view full answer...

Answer 3

The Tow Ready Custom Fit Vehicle Wiring, #118384, is designed to fit if your 2011 Jeep Liberty already has a factory 7-Way and you want to replace it with a 4-Way. The connection point is located behind the factory installed 7-way trailer…

view full answer...

Answer 4

Assuming that the military version of the 1985 Chevy C/K series trucks has the same tail light configuration as the civilian models you would start by installing a 4-Way connector using #C55312. If it does not have the proper connectors for this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching