4-Way to 5-Way Adapter Recommendation for 2015 Ford Edge

Question

Question:

Hi I have a 2015 Ford Edge Titanium. About a year ago I purchased the Trailer Hitch and 4 flat kit. I have a need to switch to a 5-flat kit because I plan on towing on occasion a boat with disc surge brakes. I need to deactivate the brakes in reverse. Did you have anything for this? Thanks

asked by: Joey M

1

Helpful Expert Reply:

We have exactly what you are looking for. The 4-way to 5-way adapter part # 20036 will convert the 4-way to a 5-way and will allow you to run the additional wire to the reverse light circuit on your Edge so that it will activate the reverse lock out solenoid of your surge brake actuator.

expert reply by: Jameson C

1

Answer 1

I do have a solution for your you. The replacement brake actuator that you need is either the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs, part #T4747220, which will work if your trailer has disc brakes…

view full answer...

Answer 2

How long of a line do you need? Do you know what size you need? The most common size is 3/16 inch like part #BH-3MFS-4-5 which is 54 inches long.

view full answer...

Answer 3

In order to find out what you need for a replacement actuator you will want to start by finding out what kind of brakes you have. A different brake actuator is needed if you have drum brakes or disc brakes. You will also want to choose a replacement…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...