Do Baby Moon Wheel Covers # AM90086 Fit Dexstar Conventional Steel Wheel

Question

Question:

I need to know if the Americana Baby Moon Trailer Wheel Center Cap will fit the Dexstar Conventional Steel Wheel - 15inch x 6inch Rim - 6 on 5-1/2 - Black Powder Coat? Thanks!

asked by: Dusty P

0

Expert Reply:

Yes, the Baby Moon Covers # AM981306 that you referenced are a fit for the Dexstar Conventional Steel Wheel # AM20514.

expert reply by: Jameson C

0

Answer 1

You will need to do some measuring to determine if the 10 Inch Electric Brake Assembly LH, item #AKEBRK-35L, is the correct assembly for your trailer. Measure the diameter of the mounted brake shoe, the width of the lining and the distance between…

view full answer...

Answer 2

For the 15 inch conventional steel wheel #AM20514 you can use baby moon hub cap #AM981306. I have included a link to a video review of this wheel for you.

view full answer...

Answer 3

We have one baby moon wheel cover for a 15 inch wheel with 6 lugs. For that we have the part #AM981306. It measures 10-9/16 inches overall and has an inside diameter of 10-1/4 inches. I attached a review video for this cap for you to check out as…

view full answer...

Answer 4

If you have a conventional style 15 inch wheel we have the part #AM90086. It has an internal diameter of 9-1/4 inches. I attached a picture of what the wheel this cap is designed to fit looks like.

view full answer...

Answer 5

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Do Baby Moon Wheel Covers # AM90086 Fit Dexstar Conventional Steel Wheel

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching