Baby Moon Wheel Center Cap Recommendation for 15 inch Wheel with 6 Lug Bolt Pattern

Question

Question:

Hhi guys. I am trying to find baby moons or the pointed moons to fit a 68 airstream 6 hole 15 inch wheel. It has spring clips on it... do you have these? thanks, if so, I want 4

asked by: Richad C

0

Expert Reply:

We have one baby moon wheel cover for a 15 inch wheel with 6 lugs. For that we have the part # AM981306. It measures 10-9/16 inches overall and has an inside diameter of 10-1/4 inches.

I attached a review video for this cap for you to check out as well.

expert reply by: Jameson C

0

Answer 1

If you have a conventional style 15 inch wheel we have the part #AM90086. It has an internal diameter of 9-1/4 inches. I attached a picture of what the wheel this cap is designed to fit looks like.

view full answer...

Answer 2

Yes, the Baby Moon Covers #AM981306 that you referenced are a fit for the Dexstar Conventional Steel Wheel #AM20514.

view full answer...

Answer 3

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Answer 4

We offer two Baby Moon hub caps, part #AM90086 that you referenced, which fits 13-, 14- and 15-inch 5-lug conventional trailer wheels; and part #AM981306 which has a pointed dome and which fits only 15-inch 6-lug conventional trailer wheels. These…

view full answer...

Answer 5

If the outside of the mounting tabs for a baby moon cover on your wheel measures 10-1/4 inches then the Baby Moon Cover part #AM981306 will fit and work well. These have an inner diameter of 10-1/4 inches. Normally these will only fit 6 lub wheels so…

view full answer...

Answer 6

There are a few ways to determine what bolt pattern you have on your '60s Serro Scotty trailer wheels with the most common being that you measure from the center of one bolt hole to the center of one directly across for an even number of bolt…

view full answer...

Answer 7

For the Dexstar Trailer Wheel part #AM20232 that you referenced the only type of cap we offer that will fit this wheel is a center cap like the #319EZ which fits through the pilot (center) hole of the wheel. The baby moon caps only fit the…

view full answer...

Answer 8

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 9

Yes the Baby Moon Cover part #AM90086 that you referenced is a fit for the Dexstar conventional style wheel you send in a picture of. I was able to verify this by looking at the sticker in your picture.

view full answer...

Answer 10

The depth of the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 is 2-3/4". The Americana Pointed Top Baby Moon Trailer Wheel Center Cap part #AM981306 has slightly more depth at 3" so they should both clear most grease caps just…

view full answer...

Answer 11

The measurement that you will want to take is the outer diameter of the inner ring and the outer diameter of the inner ring with one of the tabs (see photo). You will also want to count the bolt holes on the wheel and know the wheel diameter. The…

view full answer...

Answer 12

We do offer trailer Baby Moon hubcaps #AM90086 and #AM981306 which fit different sizes of conventional steel trailer wheels like #AM20504. We also have wheel center caps like #319EZ that fit specific styles and sizes of aftermarket wheels. All of…

view full answer...