Upgrading Trailer Axle To 3500 lb Capacity With Over-Under Kit
Question:
I would like to get some information on the dexter axle . I want to change from a 3000 pound dexter to a3500 pound dexter . My axle sets under the spring do you have a model dexter that sets under the spring or can they be rotated ? Thank you
asked by: Stan H
Helpful Expert Reply:
You can change from a 3000 lb axle to a 3500 lb axle. We have the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs, # 35545I-ST-89 or the Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs, # e43SR. The biggest measurements to consider are the hub face to hub face and the spring center to spring center measurements for compatibility.
The axle under the springs is what is called and over-under. If you need this kit, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-384-00, will get you the new hardware for your axle diameter.
Products Referenced in This Question
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: Upgrading Axles from 2,200 lbs to 3,500 lbs to Utilize 10 Inch Electric Brake Assemblies
- Q&A: What to Consider When Converting Single Axle Trailer to Tandem Axle
- Shop: Multi-Purpose Access Door - 14" Wide x 23-7/8" Tall - Black
- Search Results: ramp hinges
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR3408 Review
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: T-Strap Hinge for Enclosed Trailers - 8" Long - 180 Degree Rotation - Zinc Plated
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Enhancement
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Search Results: leaf spring
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: How to Raise Your Travel Trailer Height
- Shop: Trailer Hitch
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: equalizer
- Q&A: Does The Dexter E-Z Flex Equalizer K71-655-00 Fit 1-3/4" Wide Leaf Springs?
- Shop: Trailer Wiring
- Search Results: leaf springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Q&A: Effect of Installing Shorter Shackle Straps on Trailer with Axle Over-Under Kit
- Shop: Fifth Wheel Hitch
- Search Results: leaf spring suspension
- Search Results: axle