Recommended Hitch Reciever For 2016 Mazda 6 And Bike Rack Also To Fit A 2008 Toyota FJ Cruiser
Question:
Hi, im investigating adding a tube hitch like the 1.25inch Curt C11356 to my 2016 Mazda6 and then getting a platform bike rack like the Kuat Sherpa 2.0 that would be used on both the Mazda6 and 2008 FJ Cruiser with 2inch hitch carrying long wheelbase bikes. It seems i need and extension for the Mazda since the hitch is recessed 7inch or so and addition complication may be the FJ spare tire sticks out 10inch or so. Would i need a 7inch hitch extension to get out past the Mazda6 bumper if i had a typical 1.25/2inch platform bike rack?
asked by: Brian
Expert Reply:
I recommend the Curt Trailer Hitch Receiver Class I, # C11356, for your 2016 Mazda 6 along with the stabilizing strap # 18050. One of the measurements you will want is the distance from the center of the hitch pin hole to the outer most part of the bumper is 6-1/4 inches.
For a platform bike rack, I called Kuat to get the rise of the shank dimension of the Kuat Sherpa 2.0 and it is right at 5 inches which won't work on your Mazda 6 without an adapter as you mentioned. I don't recommend the use of an adapter on this fitment because it reduces the weight rating on your hitch by 50% so once you add the bike carrier weight you are halfway to maxed out before adding bikes. The adapters also cause an increased bounce and sway that I don't think you'd like.
My recommendation to fit both of your vehicles the best is the Swagman Semi 2.0 2-Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting, # S64686. This rack has a measurement of 8 inches from center of hitch pin to closest part of the carrier when folded. I believe this will fit both vehicles when folded based on my research, but you will want to measure your FJ Cruiser to be sure...the one we have here only has a 6-1/2 inch measurement from the center of the pin hole to clear of the spare, but that is a different model year. This rack has the shank adapter to fit a 2 inch hitch receiver as well as the 1-1/4 inch hitch receiver along with a hitch lock that also acts as an anti-rattle device to keep the noise, sway, and bounce minimal. It also has an integrated cable lock to secure your bikes. The max wheelbase on this rack is 50 inches which should accommodate your long wheelbase bikes. This is a nice bike rack and the only platform rack we carry that will fit both of your unique vehicle fits.
![Jason S](https://images.etrailer.com/static/images/catg/people/1044_tn.jpg)
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Yakima HandCuff Cable Lock for RidgeBack and SwingDaddy Bike Racks
- Bike Locks
- Cable Locks
- Keyed Unique
- Steel
- 3 Feet Long
- Gray
- Yakima
more information >
Yakima Tube Top Bike Adapter Bar
- Accessories and Parts
- Hitch Bike Racks
- Spare Tire Bike Racks
- Trunk Bike Racks
- Adapter Bar
- Frame
- Yakima
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Trailer Hitch
- Q&A: Recommended Hanging Bike Rack for a 2017 Mazda 6
- Q&A: Hitch For 2015 Mazda 6 to Carry Swagman XC Bike Rack
- Q&A: Trailer Hitch for 2016 Mazda 6 With Open-Backed Receiver Tube
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: My Trailer Hitch Doesn't Fit
- Search Results: hitch
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: Trailer Wiring Diagrams
- Shop: Roof Rack
- Search Results: trailer brake controller
- Search Results: brake controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Video: etrailer Class III Trailer Hitch Installation - 2021 Subaru Crosstrek
- Shop: Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch wiring
- Video: Curt Powered Tail Light Converter Installation - 2022 Toyota Sienna