Recommendation for a 2,000 Pound Capcity or Higher Snap-Ring Swivel Trailer Jack
Question:
I need a tongue jack with at least 2000# of lift, more would be better. My present tongue jack is bolted on to a welded bracket with a bolt hole pattern of 5 1/2 across the top and 4 1/2 vertical. all are center to center. Its a Fulton 1200# swivel jack.
asked by: Kirby D
Expert Reply:
I went out to the warehouse and pulled the 2 jacks that would most likely fit and meet the needs of your application. First, I measured the Pro Series Round, Snap-Ring Swivel Jack, # PS1400300303, that you have referenced. This jack has a bolt hole pattern of 4-1/2 inches vertically and 5-3/8 inches horizontally (the mounting plate can be turned to flip those measurements). This is a 2,000 pound capacity jack with 10 inches of lift.
Next, I measured a higher capacity 5,000 pound jack, the Bulldog Round, Snap-Ring Swivel Jack, # BD171412. The mounting plate bolt holes on this jack are 3 inches on center vertical and horizontal, so it will not fit your existing bolt hole pattern.
Product Page this Question was Asked From
Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 10 Inch Lift
- Bolt-On
- With Rectangle Foot
- Pro Series
more information >
Continue Researching
- Shop: Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Q&A: Pro Series Ring Swivel Jack Trailer Accommodation
- Q&A: Looking for a Bolt-On Jack That is Less Than 11 Inches When Attached
- Video: Review of Trailer Valet Trailer Jack - JXS Side Mount Sidewind Trailer Jack - TV64FR
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Shop: Bulldog Round, Snap-Ring Swivel Jack - Topwind - 15" Lift - 2,000 lbs
- Shop: Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
- Shop: Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs
- Q&A: Would the Pro Series Round, Snap-Ring Swivel Jack Fit Round Tongue Trailer with Bracket Installed
- Q&A: Will Pro Series Round, Snap-Ring Swivel Trailer Jack, # PS1400300303 Fit a 3 x 3 Trailer Frame
- Q&A: Will the Pro Series Round Snap-Ring Swivel Jack Bolt on a 2 Inch Trailer Tongue
- Q&A: Trailer Jack Solution For Jack that Hits Tailgate When Down
- Q&A: Bolt On Top Wind Jack Recommendation for Trailer with 15 inches of Travel
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 2K
- Shop: Replacement Weld-On L-Bend Bracket for Bulldog and Fulton Snap-Ring Swivel Jacks
- Search Results: bulldog trailer jack
- Search Results: trailer jack
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Trailer Hitch
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Shop: Brake Controller
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Trailer Jack
