Recommended Baby Moon Hub Caps for 1977 Airstream Overlander Travel Trailer

Question

Question:

Do you have baby moon hub caps that will fit the wheels of an Airstream 1977 Overlander travel trailer?

asked by: Baby M

0

Expert Reply:

We offer two Baby Moon hub caps, part # AM90086 that you referenced, which fits 13-, 14- and 15-inch 5-lug conventional trailer wheels; and part # AM981306 which has a pointed dome and which fits only 15-inch 6-lug conventional trailer wheels.

These two hub caps have different inner diameters so to match up a fit to your Airstream's wheels you'll want to measure the diameter of the circle formed by the wheels' nubs. Please refer to the linked photo that shows these. Compare the diameter of the circle formed by the three (or sometimes 4) nubs on your wheels to the inner diameters of hub caps. Part # AM90086 has an inner diameter of 9-1/4-inches and part # AM981306 has an inner diameter of 10-1/4-inches.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Phoenix USA Baby Moon Hub Cover part #PXQ1401B fits a 221mm hub bore which is 8-7/8" in diameter. Since the baby moon is designed to cover the hub bore then it most likely is not going to fit a smaller 8 inch wheel. You would need to measure…

view full answer...

Answer 2

Yes we have the baby moon covers #AM981306 that fits the 15 inch conventional trailer wheels part #AM20514 that you referenced.

view full answer...

Answer 3

We have one baby moon wheel cover for a 15 inch wheel with 6 lugs. For that we have the part #AM981306. It measures 10-9/16 inches overall and has an inside diameter of 10-1/4 inches. I attached a review video for this cap for you to check out as…

view full answer...

Answer 4

If the outside of the mounting tabs for a baby moon cover on your wheel measures 10-1/4 inches then the Baby Moon Cover part #AM981306 will fit and work well. These have an inner diameter of 10-1/4 inches. Normally these will only fit 6 lub wheels so…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I recommend replacing an entire ladder if it's damaged. You'll want to find a replacement based on the height. Such as the Stromberg Carlson #LA-401 that is 99-1/2 inches tall. They can be cut shorter to customize the length if needed.

view full answer...

Answer 9

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 10

While trailer axles do feature an upward bend like you are describing, there isn't a particular amount/measurement that is standard across the board. This bend in the axle is designed so that it will straighten under a trailer's loaded…

view full answer...

Answer 11

The Thule WingBar Evo Crossbar System part #TH711520, part #TH480R, and part #THKIT1803 while installed on your 2019 Toyota Highlander will indeed need to be positioned so that the door clip is located 13-1/4" back from the rubber molding…

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...