Which Torklift Camper Tie Downs Fits a 2009 Chevy Silverado 2500HD Short Bed With Factory Hitch

Question

Question:

Hello I have a 2009 chevrolet 2500HD 6 1/2 bed with cab steps and a factory install reciever hitch. I would like to purchase torklift camper tie down for my 2015 lance 825. Could you please give me the part number to make sure I purchase the correct anchor points. Thank you

asked by: Brian H

0

Expert Reply:

The correct TorkLift Camper Tie Downs are the part # TLC4203 for the front and then part # TLC3209 for the rear for your 2009 Chevy Silverado 2500HD with a short bed, running boards and a factory installed trailer hitch.

For turnbuckles you then would want the part # TLS9526-2-LK for a set of polished stainless steel turnbuckles.

expert reply by: Jameson C

0

Answer 1

Matej, If you're not comfortable using Happijac tie downs then you can absolutely use the TorkLift Camper Tie-Downs #TLC2205 for the front, and #TLC3209 for the rear. These are American made, custom fit to your vehicle so it'll bolt right up…

view full answer...

Answer 2

Your 2010 GMC Sierra 2500 Crew Cab seems to have standard running boards under the cab that do not extend under the truck bed. For that, you would use the fitguide option for the one without the step underneath the bed. For this option, HappiJac is…

view full answer...

Answer 3

The front and rear Torklift tie downs you need for your 2006 Chevy Silverado 2500 short bed without steps and a factory hitch are the part numbers #TLC2205 and #TLC3205.

view full answer...

Answer 4

Since the motors work when connected directly to power and you are getting the green light on the remote, it sounds like everything is operational. The remote with the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper…

view full answer...

Answer 5

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 12

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Which Torklift Camper Tie Downs Fits a 2009 Chevy Silverado 2500HD Short Bed With Factory Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching