TorkLift Camper Tie Downs for a 2010 GMC Sierra 2500 Crew Cab with a 6-1/2' Bed and Factory Hitch

Question

Question:

I have a 2010 Sierra 2500 HD 6 1/2 bed Crew cab factory hitch. Looking for torklift tie downs. Not sure what the step or board underneath bed option is..? I dont believe I have anything underneath the bed, just running boards under the cab Also, wondering about the happijac tie down - is there drilling required for my model year? Would you recommend toklift or happijac? Thanks. - also, camper is a light deal approx 1600lbs wet.

asked by: Sam

1

Helpful Expert Reply:

Your 2010 GMC Sierra 2500 Crew Cab seems to have standard running boards under the cab that do not extend under the truck bed. For that, you would use the fitguide option for the one without the step underneath the bed.

For this option, HappiJac is not available, so TorkLift is the way to go. I recommend the TorkLift Front and Rear Custom Tie Downs for your vehicle, part # TLC2205 and part # TLC3209. No drilling is required for these as they mount to the specific attachment points of your vehicle's frame.

I've linked below to a combination page of these two tie downs for easier shopping along with review videos for both.

expert reply by: Kef G

1

Answer 1

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 2

Matej, If you're not comfortable using Happijac tie downs then you can absolutely use the TorkLift Camper Tie-Downs #TLC2205 for the front, and #TLC3209 for the rear. These are American made, custom fit to your vehicle so it'll bolt right up…

view full answer...

Answer 3

The Torklift #TLC2205A front tie downs are a fit for a 2006 Silverado 2500 with a 6-1/2 foot bed without running boards that has a factory installed hitch. Fit-wise, the #TLC2205A and the #TLC2205 are identical but the #TLC2205A is constructed of…

view full answer...

Answer 4

We do carry a camper tie-down system that will work for your 2004 Chevrolet Silverado without drilling into the truck frame. I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs, for your Silverado. This system includes the front and the…

view full answer...

Answer 5

The front and rear Torklift tie downs you need for your 2006 Chevy Silverado 2500 short bed without steps and a factory hitch are the part numbers #TLC2205 and #TLC3205.

view full answer...

Answer 6

Since the motors work when connected directly to power and you are getting the green light on the remote, it sounds like everything is operational. The remote with the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The HappiJac Camper Tie-Downs #LC182906-182971 that fits your 2023 Chevy Silverado 2500 can be pieced out with the Replacement Front Anchor Plates #LC182872 being what you've referenced needing.

view full answer...

Answer 10

Yes, GM sometimes uses a red plug or dummy fuse in place of an actual fuse for the trailer battery charge circuit. I have attached a video on a 2004 Chevrolet Silverado that shows the red dummy fuse. You can move to the 2 minute and 20 second mark to…

view full answer...