3,500 lbs. Axle with Hydraulic Drum Brakes Kit
Question:
Hi there do you have an axle e43SR with hydraulic brakes? I am looking for 2 assemblies.
asked by: Jeff
Expert Reply:
I have a solution for you but unfortunately we do not carry any axles that come with hydraulic brakes. What you will need to do is buy the parts separately, but I have all the parts you will need.
First, for an axle, you will need the Dexter Axle Beam with EZ Lube Spindles # T3584F-EZ-8974. This axle is 89" long with a weight capacity of 3,500 lbs. which is the same as the # e43SR Axle you were looking at.
For your Hydraulic Trailer Brake Assemblies you will want the etrailer Left Hand Assembly part # AKUBRK-35L which is rated for 3,500 lbs. For the Right Hand Assembly, you will need part # AKUBRK-35R. The hub and drum assembly that will fit on your brake assemblies is the etrailer Hub and Drum Assembly for 3,500 lbs. Axles and 5 on 4-1/2" Wheels # AKHD-545-35-EZ-K. You will need two hubs and drums for two brake assemblies.
If you do not already have a surge actuator and brake line kit, I have some recommendations for you.
For a Surge Actuator, I recommend the Dexter Zinc-Plated Brake Actuator # 099-175-00. This actuator locks in place on hitch balls measuring 2" and is designed for drum brake applications. The weight capacity for this actuator is 7,500 lbs.
If you have a single axle with brakes, the Titan Hydraulic Brake Lines and Fittings # T4829900 is what you need. If you have tandem axles with brakes, the Titan Hydraulic Brake Lines and Fittings for Tandem-Axles # T4830000 will be the right fit.
I attached and installation video for the Dexter Trailer Axle you may want to check out. I also attached a review video of the Hydraulic Brake Assemblies and a help article on how to install Hydraulic Drum Brakes to a trailer for your convenience.
Products Referenced in This Question
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Single Axle
- Dexter
more information >
Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: TruRyde EZ Lube Drive in Grease Cap Review
- Shop: Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Q&A: Galvanized Surge Brake Actuator and Brake Assembly for a 3,500 lb Axle
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 8,000 lbs
- Video: Titan Trailer Brakes T4829900 Review
- Video: Kodiak Trailer Brakes 20TA-BLKIT Review
- Video: Review of Dexter Axle Brake Actuator - Electric-Hydraulic Brake Actuator - 099-175-00
- Video: Titan Brake Actuator - Surge Brake Actuator - T4079200 Review
- Video: Kodiak Trailer Brakes 18SI-BLKIT Review
- Video: Demco Brake Actuator - Surge Brake Actuator - DM8758811 Review
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Q&A: How To Determine Axle Diameter And Size
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Search Results: brakes
- Search Results: brake lines
- Search Results: brake master cylinder
- Search Results: brake actuator
- Search Results: grease caps
- Search Results: drum
- Search Results: boat trailer brake lines
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Q&A: Boat Trailer Brake Assembly Recommendation for a 3500 UFP Axles
- Q&A: Shorelander boat trailer axle
- Q&A: Replacement Axle with Hydraulic Drum Brakes on a 2,200 Lb Boat Trailer
- Q&A: Complete Disk Surge Brake Setup Recommendation for a Rogue Tandem Axle Boat Trailer
- Shop: Trailer Hitch