Can Brophy Steel Scissor Steps Rust

Question

Question:

Do the stairs rust?

asked by: Annie

0

Expert Reply:

The Brophy scissor steps # SS03 are steel with a black powder coat. Steel can rust if it is exposed to the elements. Eventually the powder coat can get chips or scratches in it exposing the steel and then it can start to rust. If you notice scratches or chips you can spray paint over them to help prevent corrosion.

Another option is to go with the aluminum version, # AS03. Aluminum is naturally corrosion resistant and will not rust like steel. I have linked a video review of the aluminum version for you.

expert reply by: Michael H

0

Answer 1

There are steps that can work for your Northwind camper and I recommend checking out the Brophy Camper Scissor Steps #SS03 which is a triple step that will work with your 24" height. These are not permanently mounted; instead you install a…

view full answer...

Answer 2

Steps like the Scissor Steps #SS03 come with a bracket that gets permanently mounted to the camper, but the steps themselves get removed while traveling.

view full answer...

Answer 3

The extended vertical height of the Scissor Steps part #SS03 is 30 inches from the top bracket. Based on that this product should work very well for what you are doing since the height you are looking for steps for is 35-36 inches.

view full answer...

Answer 4

The Brophy Universal Mount Steel Scissor Steps #SS03 have a height when extended of between 24- and 30-inches. You can measure your truck's bed height to see if this will allow the bottom cross piece (below the lowest step) to reach the ground…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 9

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 10

A typical tire inflator will have a CFM rating of around 1.5 to 2 CFM, with a majority of the little cheap ones being less than 1 CFM. The higher the rating the faster you'll be able to air up the tires. The Viair Automatic Portable Air…

view full answer...

Answer 11

Yes the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part #AL88396 is compatible with the B&W Turnover Ball Gooseneck part #BWGNRK1111. The kit comes with two 3/4" bolts one longer one shorter the longer…

view full answer...

Answer 12

Although the Reese Above-Bed Gooseneck Trailer Hitch, #RP58079, will not work with the Reese Elite Series Underbed Rail Adapter, #RP30156, I do have a solution for you. Instead, I recommend going with the Reese Elite Series Under-Bed Gooseneck…

view full answer...

Can Brophy Steel Scissor Steps Rust

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching