Will Brophy Universal Mount Steel Scissor Steps # SS03 Fit 2001 Dodge 2500 with High Truck Bed

Question

Question:

will this fit a 2001 2500 dodge its a high truck bed?

asked by: Tensina F

0

Expert Reply:

The Brophy Universal Mount Steel Scissor Steps # SS03 have a height when extended of between 24- and 30-inches. You can measure your truck's bed height to see if this will allow the bottom cross piece (below the lowest step) to reach the ground when installed in your preferred location.

This universal step assembly includes a mounting bracket and hardware (please see the linked photo) for installation.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Brophy scissor steps #SS03 are steel with a black powder coat. Steel can rust if it is exposed to the elements. Eventually the powder coat can get chips or scratches in it exposing the steel and then it can start to rust. If you notice scratches…

view full answer...

Answer 2

The extended vertical height of the Scissor Steps part #SS03 is 30 inches from the top bracket. Based on that this product should work very well for what you are doing since the height you are looking for steps for is 35-36 inches.

view full answer...

Answer 3

Steps like the Scissor Steps #SS03 come with a bracket that gets permanently mounted to the camper, but the steps themselves get removed while traveling.

view full answer...

Answer 4

There are steps that can work for your Northwind camper and I recommend checking out the Brophy Camper Scissor Steps #SS03 which is a triple step that will work with your 24" height. These are not permanently mounted; instead you install a…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hello Dave, glad to hear you like our videos. Since you will be hauling more of a constant load like a truck bed camper, I definitely recommend going with the Heavy-Duty RAS Kit #RAS3611-YHD. The regular duty kit is recommended for light to medium…

view full answer...

Will Brophy Universal Mount Steel Scissor Steps # SS03 Fit 2001 Dodge 2500 with High Truck Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching